Hi all,
I am getting a strange error of late while a compiling a design for Roach2.
I was able to successfully compile designs before with my current setup and
nothing has changed since the last successful compile. I am compiling a
simple design with bunch of software registers and counters. I also tried
removing software registers, but without any success. I found a thread with
a similar error, but no this one. From that thread, it seemed the problem
could be how the TMP directory is set. But I have tried changing that, but
still get the following error. Here is the error log:
--------------------------------- Version Log
----------------------------------
Version Path
System Generator 11.4.2254
/opt/Xilinx/11.1/DSP_Tools/lin64/sysgen
AccelDSP 11.4.2254
/opt/Xilinx/11.1/DSP_Tools/lin64/AccelDSP
Matlab 7.9.0.529 (R2009b)
/home/observer/tools/Matlab2009bunix64
ISE 11.4.i /opt/Xilinx/11.1/ISE
--------------------------------------------------------------------------------
Summary of Errors:
Error 0001: caught standard exception
Block: Unspecified
--------------------------------------------------------------------------------
Error 0001:
Reported by:
Unspecified
Details:
standard exception: XNetlistEngine:
An exception was raised:
com.xilinx.sysgen.netlist.NetlistInternal: mkdir
/home/observer/.Xilinx/Sysgen: Permission denied at
/opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/scripts/SgGenerateCores.pm
line 741
--------------------------------------------------------------------------------
Has anyone encountered such an error before?
Thanks,
Nimish
--
Nimish Sane
Center for Solar-Terrestrial Research
New Jersey Institute of Technology
University Heights
Newark, NJ 07102-1982 USA
Tel: (973) 642 4958
Fax: (973) 596 3617
[email protected]
