Good morning, I'm still trying to run properly the tut1 on my roach2. Alec,Andrew ,folowing your advises:
http://www.mail-archive.com/[email protected]/msg03729.html we received our roach2 from digicom and we made the update for for the roach2_nfs_uboot, and we followed your advises: from ROACH2 Test machine set-up instructions: https://docs.google.com/a/ska.ac.za/documentd/1tqw4C6uZ6EULl1OykTFL_vQTnK52UBr0aYqTg44E5wg/edit ) we used the tftp server and we launched the latest romfs: https://github.com/ska-sa/roach2_nfs_uboot.git version used: commit c872c714e2 -------------------------------------------------------- myRoach2 startup boot message : dmesg.txt with the zip files here: https://ftp.obs-nancay.fr/x3y8 now we run the telnet to check everything: telnet 192.168.0.2 7147 #version memcpy-14-g0f74f6b #build-state 2013-02-12T17:00:21 Then we tried to launch the tutorial1 : (here is my boffile, and my mdl file) ?listbof (to see my boffiles, it was possible to have the list of my boffiles, it was not possible with the previous romfs from the factory) Now I laucnhed my boffile: ?progdev roach2_tut1_2013_Mar_06_1343.bof and we get: ?progdev roach2_tut1_2013_Mar_06_1343.bof #log info 152278 raw attempting\_to\_program\_roach2_tut1_2013_Mar_06_1343.bof #log info 152365 raw attempting\_to\_program\_bitstream\_of\_19586188\_bytes\_to\_device\_/dev/roach/config #fpga loaded #log warn 153163 raw unsupported\_access\_mode\_0\_for\_register\_ #log error 153163 raw register\_called\_\_already\_defined #log error 153163 raw unable\_to\_load\_register\_mapping #log error 153163 raw unable\_to\_program\_bit\_stream\_from\_roach2_tut1_2013_Mar_06_1343.bof !progdev fail my roach2board led was blinking(flashing), and I'm unable to check the register name. ?listdev #log error 2155380 raw fpga\_not\_programmed !listdev fail Then I decided to go back and to try to load my boffile with the minicom tty usb2. my dmsg file is available here: in my boffile directory: /usr/bof # ./roach2_tut1_2013_Mar_06_1343.bof & I have many words on my screen:(screenshot here) : not found ./roach2_tut1_2013_Mar_05_0951.bof: line 7: : not found ./roach2_tut1_2013_Mar_05_0951.bof: line 8: : not found ./roach2_tut1_2013_Mar_05_0951.bof: line 9: : not found ./roach2_tut1_2013_Mar_05_0951.bof: line 10: d: not found ./roach2_tut1_2013_Mar_05_0951.bof: line 11: l: not found ./roach2_tut1_2013_Mar_05_0951.bof: line 12: syntax error: unexpected ")" Minicom2.3Minicom2.3 -sh: Minicom2.3Minicom2.3: not found [1]+ Done(2) ./roach2_tut1_2013_Mar_06_1343.bof And now with "ps aux" there is no process runing with my boffile registers. But I can see my fpga led which blinking . And of course I can not have access to my tut1 registers. can you have a look on my roach2 design files, https://ftp.obs-nancay.fr/x3y8 i've used the latest library from: https://github.com/casper-astro/mlib_devel/ commit 0b3ed97607 I'm still using the 11.5 toolflow with centos, and matlab2008b. Alec or Andrew try to run my boffile on your roach2, and can you send me also your own boffile build on your pc with your ska-sa library,and I'll make the same test here. thank in advance,
