Thanks for the tips Andrew. I think I managed to solve this problem by installing the Service Pack 3 of ISE, System Generator and EDK.
The interesting thing is that after some updates of the libraries in the model file Griffin (i_poco8_256ch_v004.mdl / I'm using mlib_devel_10_1) , the simulation results indicate that everything is okay. Later, when I run the command bee_xps in Matlab window (trying to compile) , and click on the RUN XPS button, starts doing something, but after some time, I get the error attached. I was looking for a while on the internet and http://www.mail-archive.com/casper @ lists.berkeley.edu /, but I did not find something to guide me. I hope some of you can help me :-) Best Regards Rolando Paz 2013/8/31 Andrew Martens <[email protected]> > Hi Rolando > > The error you are seeing is generated by our toolflow and says that the > version of System Generator you are using may not be supported. You should > check the Xilinx website and make sure that the versions of tools you are > using work together. > > A good idea is to search the mailing list for people who may have had the > same error as you. The web page allowing you to search the mailing list is > http://www.mail-archive.com/[email protected]/. > > Searching for "Unsupported Xilinx System Generator Version" seems to show > that the file bee_xps.m checks the version of System Generator and compares > it with the ones it knows about. You can modify this file to accept your > version of System Generator (after checking that it should work) and then > let the compile continue and see if things work. > > Regards > Andrew > > > > On Sat, Aug 31, 2013 at 7:01 PM, Rolando Paz <[email protected]> wrote: > >> Hi Andrew >> >> Thank you very much for your advice. >> >> I think the first I must do is confirm that my software is properly >> installed :-) >> >> I have installed the following software: >> >> MATLAB R2007B, ver 7.5.0.342, August 15, 2007. >> >> ISE 10.1.03, System Generator 10.1 >> >> and this libraries: >> >> https://github.com/ska-sa/mlib_devel/releases/tag/mlib_devel-2010-09-20 >> >> But when I trying make the command "bee_xps" on MATLAB (using any model >> file ) I get the attached error. >> >> What do you think? >> >> >> >> >> 2013/8/19 Andrew Martens <[email protected]> >> >>> Hi Rolando >>> >>> >>> >>>> I was talking to Griffin Foster, regarding the design of a FX >>>> correlator with a single IBOB. >>>> >>>> He told me that you did a Pocket Correlator using geometric delay >>>> compensanción. >>>> >>>> >>> I did a 4 input 400 MHz correlator a few years ago that had geometric >>> delay compensation. >>> >>> >>> I have two QuADC and one IBOB and I would do a correlator of 8 elements >>>> with this equipment. >>>> >>>> >>> The difficulty will depend on what bandwidth you want to process and the >>> channel size you need. My design processed 4*400MHz = 1600MHz of bandwidth >>> with a ROACH. You might be able to process the same amount of bandwidth >>> with an iBOB. >>> >>> >>> We are a small group who want to build an educational instrument. >>>> >>>> Can you provide a copy of the model file that you used? >>>> >>>> >>> My model file is for the ROACH so it will not be easilly usable on an >>> iBOB (it uses QDR SRAM, SDRAM as well as DSP48Es). You should look at >>> getting a basic correlator going using the 'pocket correlator' tutorial >>> (Tutorial 4 from >>> https://casper.berkeley.edu/**wiki/Tutorials<https://casper.berkeley.edu/wiki/Tutorials>). >>> You should also do the earlier tutorials to ensure that you understand the >>> tools and basic concepts. You will have to use an older version of the >>> libraries as the toolflow no longer supports iBOBs (see >>> https://github.com/ska-sa/**mlib_devel/releases/tag/last_** >>> ibob_bee2_support<https://github.com/ska-sa/mlib_devel/releases/tag/last_ibob_bee2_support> >>> ). >>> >>> The delay_wideband_prog block in the Delays section of the library will >>> allow you to compensate for the majority of the delay. Let me know when you >>> have a working system and I will help you further >>> >>> Regards >>> Andrew >>> >> >> >
i_poco8_256ch_v004_sysgen_error.log
Description: Binary data
