Hi All, I used 14.5 for a while and the only issue that I had was that registers in one of my designs kept getting disconnected from the rest of the design each time I opened up the model file. All other designs were fine. This forced me back to 14.3. Although I do plan to test out 14.6 soon.
Wes Wesley New South African SKA Project +2721 506 7365 www.ska.ac.za On Tue, Oct 1, 2013 at 2:02 PM, Jack Hickish <jackhick...@gmail.com> wrote: > Hi all, > > We were using 14.3 at the JBO workshop a few weeks ago -- partly because > of cautionary tales I heard about 14.4, and partly because of license > expiry date constraints (i.e. 14.3 was the latest version the spare Oxford > licenses supported). > > Cheers, > Jack > > On 1 Oct 2013 12:56, "Jason Manley" <jman...@ska.ac.za> wrote: > >> Might be 14.5 works fine. I haven't tried it personally and I believe >> there were issues with 14.4. Andrew and Paul are also on 14.3. >> >> Jack, what were we using at the recent workshop? >> >> Jason >> >> On 01 Oct 2013, at 13:47 , Nimish Sane wrote: >> >> > Really? Why does the Wiki page mention 14.5? >> https://casper.berkeley.edu/wiki/MSSGE_Setup_with_Xilinx_14.5_and_Matlab_2012b >> > >> > Can someone please clarify? >> > >> > Thanks a lot, >> > >> > Nimish >> > >> > >> > On Tue, Oct 1, 2013 at 4:25 AM, Jason Manley <jman...@ska.ac.za> wrote: >> > > ...instead of 13.x, we are going for the latest 14.5. >> > >> > We're currently on 14.3 at SKA-SA for all our ROACH-2 work. I haven't >> tried 14.5 but I think Wesley tried 14.4 and ran into some issues...??? >> > >> > Jason >> > >> > >> >>
