This looks OK. I would check your environment variables to make sure they are all correct. I don't really have any other suggestions.
John > Hi John > I'm using this: > > Version Path > System Generator 10.1.3.1386 > C:/xilinx/10_1/DSP_Tools/common/bin/../../sysgen > AccelDSP 10.1.3.1386 C:/xilinx/10_1/DSP_Tools/AccelDSP > Matlab 7.5.0.342 (R2007b) C:/MATLAB/R2007b > ISE 10.1.03i C:/xilinx/10_1/ISE > Libraries > C:\Libraries\xmlib_devel_10_1 > > Rolando Paz > > > 2013/12/7 John Ford <jf...@nrao.edu> > >> What version of all the tools are you using? Version 10.x of ISE is the >> last to support the xc2vp devices. >> >> >> > Hi everyone! >> > >> > Hope you can help me with this problem I've had with two different >> > computers. >> > I tried with two different computer, using the ISE, MATLAB and >> Simulink >> to >> > set IBOB, but I've failed because I find the same problem, I attached >> the >> > log file. >> > >> > The error is: >> > >> > ERROR:TclTasksC - ERROR:TclTasksC:project_028 - project set : Unknown >> > property >> > value "xc2vp50" >> > >> > Type [project properties] for more information. >> > ERROR: An error occurred when creating the ISE project. >> > >> > Failed to execute command "project set device xc2vp50". >> > ERROR:TclTasksC:project_030 - project set: Cannot set "Device=xc2vp50" >> > >> > >> > I found a similar error in the web: >> > http://www.xilinx.com/support/answers/51182.htm#solution >> > Description >> > >> > The following error is reported during evaluate process when exporting >> > RTL. >> > >> >>xtclsh run_ise.tcl || exit $? >> > ERROR:TclTasksC - ERROR:TclTasksC:project_028 - project set : Unknown >> > property >> > value "aspartan6" >> > >> > Type [project properties] for more information. >> > @E [IMPL-249] Errors occurred while synthesizing the design: >> > ERROR:TclTasksC:project_030 - project set: Cannot set "Device >> > Family=aspartan6" >> > @E [IMPL-2] Implementation with tool 'ISE' failed. >> > Solution >> > >> > This error indicates the implementation tool invoked is incompatible >> with >> > the selected device, most likely an earlier version of the tool which >> does >> > not support the targeting device. Verify that the environment variable >> is >> > set up correctly to point to the desired implementation build. >> > >> > Can you help me understand how to fix the problem? >> > >> > Best Regards >> > >> > Rolando Paz >> > >> >> >> >
