Thank you very much Glenn I will follow your advices ...
Best Regards Rolando Paz 2014-03-21 11:22 GMT-06:00 G Jones <[email protected]>: > Hi Rolando, > The problems you are running into now are python issues. I've never used > the python scripts you are using, so I can't be of much help. I'm not sure > if the people who wrote them are still up for supporting them, so I think > the best thing is to dive in yourself. In this particular case, it's saying > that trying to reshape the "bps" array (presumably bandpass?) to have > dimensions self.n_ants x self.n_chans because the number of elements in the > array is not self.nants * self.nchans. > > So you can do various things, like use the python debugger to see what the > values are, or just put in some print statements to see... i.e. this would > be helpful for figuring out your current problem: > > print "shape of bps is:",bps.shape > print "nants is",self.n_ants > print "nchans is", self.n_chans > > From there you can then figure out why the values are not what you expect > them to be... > > Hope this is helpful, > Glenn > > > On Fri, Mar 21, 2014 at 3:31 AM, Rolando Paz <[email protected]> wrote: > >> I had problems with add image, then copy the text: >> >> rolando@rolando-MS-7815:~/ibob/poco011$ poco_rx_i8_c256.py i8_c256.config >> >> Parsing config file i8_c256.config...OK >> Listening on port 7 >> Expecting integration sizes of 18432 vectors, or 73728 bytes >> C2M Parameters: >> N Antennas: 8 >> Bandwidth: 0.200000 GHz >> SDF: 0.000781 GHz >> Int Time: 0.000041 s >> Array location: ['38:25:59.24', '-79:51:02.1'] >> Recording Bandpass to file... >> Traceback (most recent call last): >> File "/usr/local/bin/poco_rx_i8_c256.py", line 408, in <module> >> udp_rx.set_bandpass() >> File "/usr/local/bin/poco_rx_i8_c256.py", line 124, in set_bandpass >> bps.shape=(self.n_ants,self.n_chans) >> ValueError: total size of new array must be unchanged >> rolando@rolando-MS-7815:~/ibob/poco011$ >> >> >> >> ---------- Forwarded message ---------- >> From: Rolando Paz <[email protected]> >> Date: 2014-03-21 1:28 GMT-06:00 >> Subject: MIRIAD FILE // IBOB CORRELATOR >> To: "[email protected]" <[email protected]> >> >> >> Hi everyone ... >> >> Regarding my problem with python and IBOB was the use of a wrong conf >> file :-) >> >> Now I found a new problem. Attached image. >> >> I also think that now I must enter the correct data, inside scripts, to >> obtain the correct file MIRIAD. >> >> I hope someone can guide me. >> >> Best Regards >> Rolando Paz >> >> >
