You want The PFB to have 2^0 simultaneous inputs, then make one PFB for
each stream.



On Wed, May 28, 2014 at 2:41 PM, Jay Brady <[email protected]> wrote:

> Hello all,
>
> With all of the different pfb/fft blocks, I've gotten a bit confused. Some
> of the terminology used on the wiki is a bit unclear to me (simultaneous
> streams vs simultaneous inputs vs parallel time samples) which has led to
> this confusion
>
> Anyway, I'm trying to build a spectrometer (a la tutorial 3) for the
> adc16x250, with the adc running 16 channel at 200 Msamp/s (so no demuxing).
> This gives me 16 inputs that are fed into a pfb/fft block combo. I'm
> concerned that I am somehow getting those 16 inputs mixed up in the pfb or
> fft.
>
> Here are the blocks and parameters I'm using right now:
> pfb_fir_real with size: 2^10, Taps: 4, Simultaneous Inputs: 2^2, and the
> Make Biplex box is not checked.
> fft_biplex_real_4x with size: 2^10 and Simultaneous Inputs 4^1.
> This gives me 4 inputs/outputs on each of the blocks which are just wired
> straight through.
>
>
> With this, the fft outputs seem ok-ish. I get a peak at the right
> frequency channel, but the sidelobe behavior is pretty terrible. I get high
> sidelobes that sometimes extend out 20-30 bins on either side of the main
> peak.
>
> Any advice you can give would be great.
>
> Jay Brady
>

Reply via email to