When the design is compiled, several folders are created. The XPS_IBOB_base folder is one of them, and inside this folder is created the Software folder, and inside this folder is created the main.c file. I remove this main.c file created by the compilation, and I copy the new main.c in the same directory.
C:/i_poco4_1024ch_v007/XPS_iBOB_base/Software/main.c Thanks Glenn, I will do the test you suggested me. Rolando Paz 2014-07-04 8:39 GMT-06:00 G Jones <[email protected]>: > Yeah, somehow it looks like the new main.c you are trying to use is not > getting included. Where are you putting the main.c? One thing you can try > is instead of putting your new main.c in there, try just deleting the > main.c that is there and try the run init_bram. If it does not fail, then > that means the main.c you are replacing is not the one it is using... > > > On Fri, Jul 4, 2014 at 10:31 AM, Rolando Paz <[email protected]> wrote: > >> Hi Glenn >> >> Yes, I communicate with the IBOB over ethernet. >> >> I found what you see in the attached images. >> >> After running the following commands, with the Aaron bit file programed >> inside the IBOB, the bram transmission was initialized. >> >> regwrite ctrl_sw 0x03ff >> regwrite sync_gen/period 149504000 >> startudpdump >> >> When I run the same commands with my bit file inside the IBOB, I found >> that the command startudpdump is not there! >> >> That's why I think I'm doing something wrong, so the main.c does not >> modify the PowerPC code, and hence is not programmed startudpdum. >> >> >> >> >> >> 2014-07-04 8:04 GMT-06:00 G Jones <[email protected]>: >> >> Hi Rolando, >>> I think you mentioned that you are able to communicate with the IBOB >>> over ethernet. Is that correct? Can you read and set registers using the >>> UDP interface? If so, then the communication is working and the problem is >>> not the communication itself. >>> >>> Glenn >>> >>> >>> On Fri, Jul 4, 2014 at 9:59 AM, Rolando Paz <[email protected]> wrote: >>> >>>> Hi again everyone! >>>> >>>> I do not know if some one still remember this ... :-) but I will do >>>> the question: >>>> >>>> I'm trying to modify the PowerPC code which interacts with LWIP in >>>> order to automate the transmission of the shared BRAM from my correlator, >>>> but I was unable accomplish it. >>>> >>>> I'm using CMD (WINXP) to do this: >>>> >>>> The new main.c file is located in the following directory: >>>> >>>> C:/i_poco4_1024ch_v007/XPS_iBOB_base/Software/main.c >>>> >>>> Then I run the following commands, inside the following directory: >>>> >>>> Directory: >>>> >>>> C:/i_poco4_1024ch_v007/XPS_iBOB_base/ >>>> >>>> Commands: >>>> >>>> > xps -nw system.xmp >>>> > run init_bram >>>> >>>> >>>> This is the output of "run init_bram": >>>> >>>> XPS% run init_bram >>>> powerpc-eabi-gcc -Os >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/main >>>> .c /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/tinysh.c >>>> /cygdrive/c/i >>>> _poco4_1024ch_v007/XPS_iBOB_base/drivers/core_util.c >>>> /cygdrive/c/i_poco4_1024ch_ >>>> v007/XPS_iBOB_base/drivers/xps_xsg/clk.c >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBO >>>> B_base/drivers/xps_xsg/devices.c >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/d >>>> rivers/xps_xsg/memory.c >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xp >>>> s_sw_reg/reg.c >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_lwip/fi >>>> fo.c >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_lwip/lwipinit.c / >>>> cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_lwip/lwiputil.c >>>> /cygdri >>>> ve/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_bram/bram.c >>>> /cygdrive/c/i_poc >>>> o4_1024ch_v007/XPS_iBOB_base/drivers/core_info.c -o >>>> Software/executable.elf \ >>>> -Wl,-T >>>> -Wl,/cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/LinkerScr >>>> ipt.lwip -I./ppc405_1/include/ -ISoftware/ -Idrivers/ >>>> -Idrivers/xps_xsg/ -I >>>> drivers/xps_sw_reg/ -Idrivers/xps_lwip/ -Idrivers/xps_bram/ >>>> -L./ppc405_1/lib/ >>>> \ >>>> -DLWIP_ENABLE -llwip4 >>>> In file included from ./ppc405_1/include/netif/etharp.h:43, >>>> from ./ppc405_1/include/netif/xemacliteif.h:42, >>>> from >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/mai >>>> n.c:24: >>>> ./ppc405_1/include/lwip/ip.h:125: warning: 'packed' attribute ignored >>>> for field >>>> of type 'struct ip_addr' >>>> ./ppc405_1/include/lwip/ip.h:126: warning: 'packed' attribute ignored >>>> for field >>>> of type 'struct ip_addr' >>>> In file included from ./ppc405_1/include/netif/xemacliteif.h:42, >>>> from >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/mai >>>> n.c:24: >>>> ./ppc405_1/include/netif/etharp.h:50: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'u8_t[5u]' >>>> ./ppc405_1/include/netif/etharp.h:56: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct eth_addr' >>>> ./ppc405_1/include/netif/etharp.h:57: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct eth_addr' >>>> ./ppc405_1/include/netif/etharp.h:65: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct eth_hdr' >>>> ./ppc405_1/include/netif/etharp.h:70: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct eth_addr' >>>> ./ppc405_1/include/netif/etharp.h:71: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct ip_addr' >>>> ./ppc405_1/include/netif/etharp.h:72: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct eth_addr' >>>> ./ppc405_1/include/netif/etharp.h:73: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct ip_addr' >>>> ./ppc405_1/include/netif/etharp.h:79: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct eth_hdr' >>>> ./ppc405_1/include/netif/etharp.h:80: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct ip_hdr' >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/main.c: In >>>> function 'star >>>> tudpdump_cmd': >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/main.c:184: >>>> warning: assi >>>> gnment makes pointer from integer without a cast >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/main.c: In >>>> function 'main >>>> ': >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/main.c:416: >>>> warning: inco >>>> mpatible implicit declaration of built-in function 'memcpy' >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/main.c:437: >>>> warning: inco >>>> mpatible implicit declaration of built-in function 'memcpy' >>>> In file included from ./ppc405_1/include/netif/etharp.h:43, >>>> from ./ppc405_1/include/netif/xemacliteif.h:42, >>>> from >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_ >>>> lwip/lwipinit.c:10: >>>> ./ppc405_1/include/lwip/ip.h:125: warning: 'packed' attribute ignored >>>> for field >>>> of type 'struct ip_addr' >>>> ./ppc405_1/include/lwip/ip.h:126: warning: 'packed' attribute ignored >>>> for field >>>> of type 'struct ip_addr' >>>> In file included from ./ppc405_1/include/netif/xemacliteif.h:42, >>>> from >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_ >>>> lwip/lwipinit.c:10: >>>> ./ppc405_1/include/netif/etharp.h:50: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'u8_t[5u]' >>>> ./ppc405_1/include/netif/etharp.h:56: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct eth_addr' >>>> ./ppc405_1/include/netif/etharp.h:57: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct eth_addr' >>>> ./ppc405_1/include/netif/etharp.h:65: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct eth_hdr' >>>> ./ppc405_1/include/netif/etharp.h:70: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct eth_addr' >>>> ./ppc405_1/include/netif/etharp.h:71: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct ip_addr' >>>> ./ppc405_1/include/netif/etharp.h:72: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct eth_addr' >>>> ./ppc405_1/include/netif/etharp.h:73: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct ip_addr' >>>> ./ppc405_1/include/netif/etharp.h:79: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct eth_hdr' >>>> ./ppc405_1/include/netif/etharp.h:80: warning: 'packed' attribute >>>> ignored for fi >>>> eld of type 'struct ip_hdr' >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_lwip/lwipinit.c: >>>> In fu >>>> nction 'lwipinit': >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_lwip/lwipinit.c:243: >>>> w >>>> arning: incompatible implicit declaration of built-in function 'memcpy' >>>> In file included from ./ppc405_1/include/lwip/tcp.h:44, >>>> from >>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_ >>>> lwip/lwiputil.c:12: >>>> ./ppc405_1/include/lwip/ip.h:125: warning: 'packed' attribute ignored >>>> for field >>>> of type 'struct ip_addr' >>>> ./ppc405_1/include/lwip/ip.h:126: warning: 'packed' attribute ignored >>>> for field >>>> of type 'struct ip_addr' >>>> powerpc-eabi-size Software/executable.elf >>>> text data bss dec hex filename >>>> 57400 1528 1857072 1916000 1d3c60 Software/executable.elf >>>> >>>> ********************************************* >>>> Initializing BRAM contents of the bitstream >>>> ********************************************* >>>> bitinit system.mhs -pe ppc405_1 Software/executable.elf \ >>>> -bt implementation/system.bit -o implementation/download.bit >>>> >>>> bitinit version Xilinx EDK 10.1.03 Build EDK_K_SP3.6 >>>> Copyright (c) Xilinx Inc. 2002. >>>> >>>> Parsing MHS File system.mhs... >>>> >>>> Overriding IP level properties ... >>>> >>>> Performing IP level DRCs on properties... >>>> >>>> Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC... >>>> Address Map for Processor ppc405_1 >>>> (0b0000010000-0b0000010011) ppc405_1 >>>> (0b0000100000-0b0000100011) ppc405_1 >>>> (0000000000-0x001fffff) plb_sram_0 plb >>>> (0xd0000000-0xd00000ff) >>>> i_poco4_1024ch_v007_acc_len plb->plb2opb_bridge_0->opb0 >>>> (0xd0000100-0xd00001ff) >>>> i_poco4_1024ch_v007_acc_num plb->plb2opb_bridge_0->opb0 >>>> (0xd0000200-0xd00002ff) >>>> i_poco4_1024ch_v007_adc_sum_sq plb->plb2opb_bridge_0->opb0 >>>> (0xd0000300-0xd00003ff) >>>> i_poco4_1024ch_v007_ctrl_sw plb->plb2opb_bridge_0->opb0 >>>> (0xd0000400-0xd00004ff) >>>> i_poco4_1024ch_v007_eq_coeff plb->plb2opb_bridge_0->opb0 >>>> (0xd0002000-0xd0003fff) >>>> i_poco4_1024ch_v007_ibob_lwip_ethlite plb->plb2opb_bridge_0->opb0 >>>> (0xd0004000-0xd00040ff) >>>> i_poco4_1024ch_v007_ibob_lwip_macbits plb->plb2opb_bridge_0->opb0 >>>> (0xd0004100-0xd00041ff) >>>> i_poco4_1024ch_v007_sync_gen1_period plb->plb2opb_bridge_0->opb0 >>>> (0xd0006000-0xd0007fff) >>>> i_poco4_1024ch_v007_xengine4_aa_real plb->plb2opb_bridge_0->opb0 >>>> (0xd0008000-0xd0009fff) >>>> i_poco4_1024ch_v007_xengine4_ab_imag plb->plb2opb_bridge_0->opb0 >>>> (0xd000a000-0xd000bfff) >>>> i_poco4_1024ch_v007_xengine4_ab_real plb->plb2opb_bridge_0->opb0 >>>> (0xd000c000-0xd000dfff) >>>> i_poco4_1024ch_v007_xengine4_ac_imag plb->plb2opb_bridge_0->opb0 >>>> (0xd000e000-0xd000ffff) >>>> i_poco4_1024ch_v007_xengine4_ac_real plb->plb2opb_bridge_0->opb0 >>>> (0xd0ffdd00-0xd0ffddff) opb_clockcontroller_0 >>>> plb->plb2opb_bridge_0->opb0 >>>> (0xd0ffdf00-0xd0ffdfff) RS232_UART_1 plb->plb2opb_bridge_0->opb0 >>>> (0xd1000000-0xd1001fff) >>>> i_poco4_1024ch_v007_xengine4_ad_imag plb->plb2opb_bridge_opb1->opb1 >>>> (0xd1002000-0xd1003fff) >>>> i_poco4_1024ch_v007_xengine4_ad_real plb->plb2opb_bridge_opb1->opb1 >>>> (0xd1004000-0xd1005fff) >>>> i_poco4_1024ch_v007_xengine4_bb_real plb->plb2opb_bridge_opb1->opb1 >>>> (0xd1006000-0xd1007fff) >>>> i_poco4_1024ch_v007_xengine4_bc_imag plb->plb2opb_bridge_opb1->opb1 >>>> (0xd1008000-0xd1009fff) >>>> i_poco4_1024ch_v007_xengine4_bc_real plb->plb2opb_bridge_opb1->opb1 >>>> (0xd100a000-0xd100bfff) >>>> i_poco4_1024ch_v007_xengine4_bd_imag plb->plb2opb_bridge_opb1->opb1 >>>> (0xd100c000-0xd100dfff) >>>> i_poco4_1024ch_v007_xengine4_bd_real plb->plb2opb_bridge_opb1->opb1 >>>> (0xd100e000-0xd100ffff) >>>> i_poco4_1024ch_v007_xengine4_cc_real plb->plb2opb_bridge_opb1->opb1 >>>> (0xd1010000-0xd1011fff) >>>> i_poco4_1024ch_v007_xengine4_cd_imag plb->plb2opb_bridge_opb1->opb1 >>>> (0xd1012000-0xd1013fff) >>>> i_poco4_1024ch_v007_xengine4_cd_real plb->plb2opb_bridge_opb1->opb1 >>>> (0xd1014000-0xd1015fff) >>>> i_poco4_1024ch_v007_xengine4_dd_real plb->plb2opb_bridge_opb1->opb1 >>>> (0xffff0000-0xffffffff) plb_bram_if_cntlr_1 plb >>>> Address Map for Processor ppc405_0 >>>> (0b0000010000-0b0000010011) ppc405_0 >>>> (0b0000100000-0b0000100011) ppc405_0 >>>> >>>> Initializing Memory... >>>> Checking ELFs associated with PPC405 instance ppc405_1 for overlap... >>>> >>>> >>>> Analyzing file Software/executable.elf... >>>> Running Data2Mem with the following command: >>>> data2mem -bm "implementation/system_bd" -bt "implementation/system.bit" >>>> -bd >>>> "Software/executable.elf" tag ppc405_1 -o b implementation/download.bit >>>> Memory Initialization completed successfully. >>>> >>>> 0 >>>> XPS% >>>> >>>> >>>> If anyone has any suggestions I would appreciate it very much! :-) >>>> >>>> Best Regards >>>> >>>> Rolando Paz >>>> >>>> >>> >> >
