Hi Peter, 

I have no input on operation of the PAPER bit code, just some tips on 1PPS 
distribution. Are you using a passive power divider of the type used for RF 
signals?  Mini circuits or similar?  This, or cascaded BNC or SMA T-s are not 
well suited to distributing multiple copies of a 1PPS signal with integrity. 

There are a few solutions. We use CMOS distribution amplifiers from Stanford 
Research Systems.

http://www.thinksrs.com/

You can configure the distribution amplifier you need from this page:

http://www.thinksrs.com/products/FS730-3.htm

(Can’t link directly to a sample product but be sure to select a base or main 
frame, and add the CMOS distribution amplifier “Internal Option”.

Good luck.

Jonathan



> On Jan 29, 2015, at 9:00 PM, Peter Niu <[email protected]> wrote:
> 
> Hi, David,
> We are facing a sync problem.We deployed 8 ROACH2s in our system now.Taught 
> as the PAPER model ,I connect a 1pps in the sync_in port of pf1,and put 
> signal out from sync_out of pf1 into the sync_in of pf2,and so on. When I run 
> the paper_init.rb to initial all the 8 ROACHes,However The different ROACH 
> has their own sequence of MCNT . Different ROACH(different FID) send the 
> different MCNT in the same time,which should stay the same.
> I thought it is a 1PPS sync problem ,I want to use a power divider to split 
> the 1PPS signal into 8 ways to each ROACH.But the power divider did not work 
> in our lab. (I thought the power divider need to be special) Do you have some 
> good suggestions?
> Thanks for your help again!
> Peter
> 
> 


Reply via email to