Hi all!
I have two ROACH2s which I am operating remotely. I have a bit file and
script which I have previously successfully tested in the past.
Currently, it works with one of the two ROACH2s, but fails at an
inconsistent location with the other. Specifically, the bad ROACH will
stop responding to all telnet connections, causing a "client not
connected" via python. The only resolution is to power-cycle the ROACH,
to my knowledge. Both ROACHes are using soloboot, and they have the
same clock, 1pps source, similar input signal characteristics, etc.
To reiterate, this issue never happens with the other ROACH2 o_0
Any experience with this issue? Thanks in advance!
--
Ryan Monroe
PhD Student | Electrical Engineering
California Institute of Technology
Cahill 255 | 626.773.0805
