Jack, We are using the 10GbE SFP+ port P1 on the SNAPv1 board. The cable that we have between the snap and the server is XFP-SFP+
Thanks, David On Tue, Dec 11, 2018 at 2:46 PM Jack Hickish <jackhick...@gmail.com> wrote: > Hi David, > > What type of transceiver are you using on the snap, and which port are you > using? > > Cheers > Jack > > On Tue, 11 Dec 2018, 1:06 pm David Marsh, <davidmma...@gmail.com> wrote: > >> Hi all, >> >> I am having a similar issue (to >> https://www.mail-archive.com/casper@lists.berkeley.edu/msg07245.html) >> when trying to program the SNAP board and get an ip address for the 10GbE >> port. >> >> I am able to program the golden image using a Raspberry Pi 3 b+. After >> programming the image, these are the debug messages from the mini usb: >> ICAP init ok >> #JAM starting >> Using ethernet core gbe0 >> MAC 0x0034B6A31701 >> IP 00000000 NM 00000000 GW 00000000 >> link is DOWN >> >> I also used wireshark and no packets were received. I am assuming that >> the problem is with the link and I was wondering if anyone had some ideas >> on things to try to get the link up. >> >> Some other information that might be useful. >> On the server side when running ip addr it outputs: >> eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state UNKNOWN qlen 1000 >> link/ether f4:52:14:4c:73:b0 brd ff:ff:ff:ff:ff:ff >> inet 192.168.5.1/24 brd 192.168.5.255 scope global eth0 >> >> >> A dhcp server was set up. Using the dhcp server we were able to assign an >> ip address to the raspberry pi. For the 10Gbe port the server has the >> following: >> subnet 192.168.5.0 netmask 255.255.255.0 { >> interface eth0; >> range 192.168.5.10 192.168.5.100; >> option routers 192.168.5.1; >> option subnet-mask 255.255.255.0; >> option broadcast-address 192.168.5.255; >> } >> >> Any help is appreciated. >> Thanks, >> David >> >> >> >> >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "casper@lists.berkeley.edu" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to casper+unsubscr...@lists.berkeley.edu. >> To post to this group, send email to casper@lists.berkeley.edu. >> > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To post to this group, send email to casper@lists.berkeley.edu. > -- You received this message because you are subscribed to the Google Groups "casper@lists.berkeley.edu" group. To unsubscribe from this group and stop receiving emails from it, send an email to casper+unsubscr...@lists.berkeley.edu. To post to this group, send email to casper@lists.berkeley.edu.