Hi Glen and Jonathan, We are currently porting the toolflow to target the Red Pitaya, which is a very cost effective board. I am not sure what your needs are, Glen? I would suggest you check out the Red Pitaya link below. The Red Pitaya utilises a Zynq device and we will be using the old TcpBorphServer that was used on the legacy cards running Power PC to target the Red Pitaya Zynq ARM.
I am holding the CASPER Hardware Porting Workshop (HPW) 2019 in SA from July 7th to July 12th where we will also be running Red Pitaya tutorials. The idea is that these same tutorials will also be run at the CASPER workshop hosted by Jonathan and his team. If you are keen on attending the HPW2019 then send me an email directly to [email protected] and I can sign you up, but you will also gain a lot of information by attending Jonathan's workshop. In summary, Red Pitaya is very cost effective. The toolflow and casperfpga will be able to target the Red Pitaya by July 2019, so the board will be fully CASPERised. We hope to be able to present the work done on the Red Pitaya at Jonathan's workshop and will present it at the HPW2019 in SA. I hope this helps. Kind regards, Adam Isaacson South African Radio Astronomy Observatory (SARAO) Hardware Manager Cell: (+27) 825639602 Tel: (+27) 215067300 email: [email protected] On Wed, May 15, 2019 at 10:00 PM Jonathan Weintroub < [email protected]> wrote: > Hi Glen, > > Thanks for checking in. We’re still working on the SoC focus curriculum > and content, but broadly the intent is to highlight Xilinx’s new high > performance RFSoC product line, with the development kit of current > interest being ZCU111. > > https://www.xilinx.com/products/boards-and-kits/zcu111.html > > The chip is XCZU28DR-2FFVG1517E > > So, that’s not low end, though enabling early career stage learning is an > ongoing focus of CASPER, and a particular focus of this workshop. > > Another platform which I see discussed by some, and for which there will > be presence is Red Pitaya: > > https://www.redpitaya.com/ > > Maybe that’s closer to your low end request? > > Regarding the ADI and Pynq SDR or SoC products, I don’t think anyone would > have a problem with time being devoted at the workshop to those platforms, > but someone would need to help develop the material. Let me leave my > response there, and ask if you have any specific suggestions or ideas? > > Do you plan to attend the workshop, > > Thanks for your interest again and best wishes. > > Jonathan Weintroub > > > > > On May 15, 2019, at 3:43 PM, Langston, Glen <[email protected]> wrote: > > > > Hi Jonathan, > > > > Thanks for organizing the CASPER workshop at Harvard this summer. > > One issue I have is accessing CASPER compatible hardware, in order to > learn by doing. > > > > As you’re probably aware, there are now several very low end Xilinx > devices such as > > Analog Device’s PlutoSDR > > ( > https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/adalm-pluto.html > ) > > > > and the Pynq boards: > > > https://store.digilentinc.com/pynq-z1-python-productivity-for-zynq-7000-arm-fpga-soc/ > > > > It would be great if there was also a low-end CASPER interface that > would allow programming them > > with CASPER tools. > > > > Is anything like that underdevelopment? Your email (below) suggests > there is a system-on-chip > > focus to the workshop, but I did not find anything in the posted agenda > suggesting this. What > > devices will be considered? > > > > Best regards > > > > Glen > > > > > >> On May 14, 2019, at 7:00 PM, Jonathan Weintroub < > [email protected]> wrote: > >> > >> This message repeats the second call for contributions, setting a 1 > week extension on the abstract submission deadline to next Wednesday 22 > May. We appreciate the efforts of those CASPERites who have made > submissions so far, holding the 15 May deadline. We emphasize again that > proposals for teaching focused presentations, of flexible length, are > actively solicited and appreciated. Please feel free to pass this message > on to those in your networks who may be interested in the workshop. > >> > >> Oh, and we have a positive indication (pending final approval) on our > funding proposal for need-based travel support, and continue to encourage > applications in the form of an emailed motivation, which will be > strengthened by a teaching or research contribution to the meeting. > >> > >> > >> Dear CASPERites, PIRE folks, and other DSP aficionados, > >> > >> The 2019 CASPER Workshop and PIRE Summer School will be held at the > Center for Astrophysics | Harvard & Smithsonian in Cambridge, > Massachusetts, USA from 12 to 16 August 2019. The focus of the workshop > will be teaching and early career focused, with a hands on program as > usual, and also tutorial talks. We also plan a technical focus on > emergent FPGA RF System on Chip (RFSoC) technology. In addition to the > usual research contributions, which are welcome even if advanced, we ask > senior CASPER and PIRE members to please consider instead contributing > talks and posters directed at review and teaching on relevant topics in DSP > and CASPER in keeping with the summer school focus. We plan to solicit > industry contributions as well. > >> > >> Please send talk title, co-authors and approximately 300 word abstract > in plain text with “Contribution: LastName” in the Subject line to: > casper2019cfa.harvard.edu > >> > >> The first deadline for contributions is 22 May, and we aim to send > early acceptances for talks or posters by 31 May, when online registration > will open. There will be an early registration deadline of 17 June. Early > registration will be rewarded with a discounted registration fee of $200. > Regular registration is $250 and will close on 12 July. Contributions will > continue to be reviewed for acceptance until 30 June on a space-available > basis, communicated as soon as possible thereafter. > >> > >> We have posted a workshop website with workshop schedule, travel > logistics, hotel suggestions, and other information will be updated from > time to time: > >> www.cfa.harvard.edu/casper2019. More information about the > Collaboration for Astronomy Signal Processing and Electronics Research > (CASPER) can be found on casper.berkeley.edu. > >> > >> We are actively working on raising funds for need-based partial travel > support for junior attendees and plan to solicit applications before the > registration deadline. Those who intend to apply for partial travel > support should submit titles and abstracts by the first 15 May deadline if > possible. The relevance of your contribution will be considered with your > application in assigning the support. We are fairly confident that some > degree of travel, lodging and registration support will become available, > however at this point can make no guarantees. > >> > >> We look forward to the workshop, and thank all in the CASPER community > in advance for their interest and contributions. Please also send your > general questions to [email protected] with an appropriate > subject line. > >> > >> Thanks for your interest in the 2109 CASPER Workshop and PIRE Summer > School, and we look forward to welcoming the community in Cambridge. > >> > >> Best regards, > >> > >> > >> The 2019 CASPER Workshop and PIRE Summer School Local Organizing > Committee > >> Tina Arabadjis > >> Shep Doeleman > >> Lincoln Greenhill > >> Jenine Humber > >> Rosie Johnson (Univ. Arizona PIRE) > >> Dan Marrone (Univ. Arizona PIRE) > >> Alex Raymond > >> Jonathan Weintroub > >> > >> -- > >> You received this message because you are subscribed to the Google > Groups "[email protected]" group. > >> To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected]. > >> To post to this group, send email to [email protected]. > > > > > > > > Glen I Langston, Ph. D. > > Galactic Astronomy Program Director > > National Science Foundation > > 2415 Eisenhower Avenue > > Alexandria, VA 22314 > > P: 703-292-4937 > > C: 703-470-9820 > > [email protected] > > > > -- > You received this message because you are subscribed to the Google Groups " > [email protected]" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
