Hi Jack, I was using matlab 2016b in the first place. The fft block is not redrawing after placed in model.
Then I have installed matlab 2018a, and it redraws but gives the error message in my last email. I have vivado 2018.2. Is casper supporting 2018.3? Cheers, Chao On Thu, 27 Jun 2019, 17:21 Jack Hickish, <[email protected]> wrote: > Hi Chao, > > What versions of Xilinx/MATLAB/mlib_devel are you using (your first > email said matlab 2016b, but this one says 2018a?) > > Cheers > Jack > > On Thu, 27 Jun 2019 at 07:10, Chao Liu <[email protected]> wrote: > > > > Hi Jack, > > > > I have tried to put fft block in a simulink model and it is not > redrawing itself. > > > > I have installed Matlab 2018a. It redraws after placed and configured in > simulink, but the follow error massage popped up. > > > > > > > > > > Also it looks like there is not input data port generated? > > > > Best regards, > > > > Chao > > > > > > On Wed, Jun 26, 2019 at 11:12 PM Jack Hickish <[email protected]> > wrote: > >> > >> Hi Chao, > >> > >> This is actually indeed behaviour. In the library, the fft blocks are > empty shells. When you configure them in a design (setting input bitwidth, > binary point, npoints, etc) they should redraw themselves with ports. Note > that for a big fft this can take a few minutes. > >> > >> Let me know if this isn't what happens for you > >> > >> Cheers > >> Jack > >> > >> > >> > >> On Wed, 26 Jun 2019, 2:56 pm Chao Liu, <[email protected]> wrote: > >>> > >>> Hi all, > >>> > >>> > >>> I was trying to setup casper and matlab 2016b on the ubuntu 16.04 > running on Virtual box. > >>> > >>> > >>> I followed the steps at > https://casper-toolflow.readthedocs.io/en/latest/. > >>> > >>> > >>> After matlab opened, I found that the FFT blocks in CASPER library do > not have any ports shown. Do you have any idea of what might be the reason? > >>> > >>> > >>> > >>> Best regards, > >>> > >>> > >>> Chao > >>> > >>> > >>> -- > >>> You received this message because you are subscribed to the Google > Groups "[email protected]" group. > >>> To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected]. > >>> To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/52593908-ee82-44b7-98ee-f57b2d25e6ad%40lists.berkeley.edu > . > >> > >> -- > >> You received this message because you are subscribed to the Google > Groups "[email protected]" group. > >> To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected]. > >> To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKS%3D8G2tDWxA6rwStVuXk2GdYuW7%2BkEOHrp8rw6-8XtLUaQ%40mail.gmail.com > . > > > > -- > > You received this message because you are subscribed to the Google > Groups "[email protected]" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAJCJdHXKuXQ4X0YfaC4JEAU7TF%2B_0QF45cS1EL72BrFnn6wfwA%40mail.gmail.com > . > > -- > You received this message because you are subscribed to the Google Groups " > [email protected]" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSmVWu1i_465B-UA5nZ%3DZ1CoA7CrmjPFw1h_XJo66ACgZg%40mail.gmail.com > . > -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAJCJdHWgZwEtsxvxCUXt72iXOt2vR4Zi220oO6MspYoadtFTng%40mail.gmail.com.
