Hello, I have been using the basic suite of tests available on github from this site to do some basic functionality tests on roach2, rev2
https://github.com/ska-sa/roach2_testing I am having some issues with some of the tests, the error messages are shown below. It looks like some of the tests were not implemented as seen below. Does anyone have a more recent version available? ---------------------------------------------------------------------------- r2bit v6comm (test: v6comm, 0: version check) FAILED: rcs revision not supported: 0 (test: v6comm, 1: scratchpad access) PASSED => r2bit v6gbe (test: v6gbe, 0: phy status) FAILED: not implemented (test: v6gbe, 1: sgmii status) PASSED (test: v6gbe, 2: ping) FAILED: timed out waiting for ping => r2bit ddr3 (test: ddr3, 0: calibration) PASSED (test: ddr3, 1: ppc access) PASSED (test: ddr3, 2: fabric) FAILED: test not implemented => r2bit zdok0 ERROR: bit zdok0 is not a supported built-in test => r2bit zdok1 ERROR: bit zdok1 is not a supported built-in test => r2bit tge (test: tge[0], 0: phy status) PASSED (test: tge[0], 1: fabric counter test) FAILED: not implemented ---------------------------------------------------------------------------------------- In addition, the QDR tests with the bitcodes are hardcoded for a clock speed of 200 MHz fabric speed. Would it be possible to get the model files for those test bitcodes,so that I can recompile them with the clock rate used on the SMA system which is 286 MHz. Thanks, Ranjani -- You received this message because you are subscribed to the Google Groups "casper@lists.berkeley.edu" group. To unsubscribe from this group and stop receiving emails from it, send an email to casper+unsubscr...@lists.berkeley.edu. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAOiygMD9daAtjNucXTzdPS_jZfOt%3DSJN4Q8%3Ds9BokUT9gYunDg%40mail.gmail.com.