Hello Aravind, Unfortunately, at this time there is not a complete “polished” ZCU111 tutorial that exists much like what you will find for the Red Pitaya or SNAP boards. However, the goal is to work the ZCU111 up to that point to provide similar tutorials introducing the ZCU111 and demonstrate some of its capabilities within the Toolflow (such as how to interact with the ADC — RF Data Converter in the Xilinx vernacular). I can summarize briefly the current porting status of the board to give you an idea of where it stands.
A platform yellow block does exist for the board in the the Toolflow library and a test model using that block successfully compiles. This test model can be found over in the master branch of the Toolflow in the `test_models` directory https://github.com/casper-astro/mlib_devel/tree/master/jasper_library/test_models This will allow you to build any logic using other CASPER blocks targeting the ZCU111 no problem. However, the ADC yellow block is currently being developed and without it there is no way to get data into your logic without exporting your CASPER design as system generator products and using Vivado to complete your hardware design. There is a ZCU111 branch for the tools that will continue to receive updates as the porting progresses. Communication with the FPGA via casperfpga using the MPSoC is supported. However, how to go about setting this up for the board is also not yet documented. This would ideally be part of the CASPER-ized Linux image with explanation and examples for using casperfgpa or as part of a future getting started/tutorial for the ZCU111. I am happy to field any other questions you have regarding the ZCU111 and discuss with you the specifics of this in more detail if you like. Best, Mitch Burnett On Apr 21, 2020, at 3:36 PM, Aravind Venkitasubramony <aravind.venkitasubram...@colorado.edu<mailto:aravind.venkitasubram...@colorado.edu>> wrote: Hello all I was wondering if there were any tutorials made for working with the ZCU111 evaluation boards yet. Thanks Aravind -- You received this message because you are subscribed to the Google Groups "casper@lists.berkeley.edu<mailto:casper@lists.berkeley.edu>" group. To unsubscribe from this group and stop receiving emails from it, send an email to casper+unsubscr...@lists.berkeley.edu<mailto:casper+unsubscr...@lists.berkeley.edu>. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAFQ_oEgL3LqevGr2gB4rwTAu901frXSeKXgkXhTfLr0tJ1m8Cw%40mail.gmail.com<https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAFQ_oEgL3LqevGr2gB4rwTAu901frXSeKXgkXhTfLr0tJ1m8Cw%40mail.gmail.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "casper@lists.berkeley.edu" group. To unsubscribe from this group and stop receiving emails from it, send an email to casper+unsubscr...@lists.berkeley.edu. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/DFFCCCEA-B279-4CE0-A310-0CF861E21DEC%40byu.edu.