Hi Jonathon, Thank you for your response. SOLVED! I opted to follow option 3) i.e.: install 2019.1.1 and it worked like a charm! ReadTheDocumetns webpage is correct, asks for 2019.1.1, I am surprised by the level of version dependency of these TCL scripts. Thank you again, Best, XB
On Tue, Sep 8, 2020 at 11:02 PM Jonathon Kocz <[email protected]> wrote: > Hi Xavi, > > As I found recently, the block diagram tcl scripts are *really* pedantic > about the version they are run in. If it doesn't match, they just don't > run, and then the design can't be compiled. > > Checking out git, it looks like this happened during the last hardware > porting workshop, and the docs should have been updated to be accurate a > few months ago. - It looks like they ask for Vivado 2019.1.1 > https://casper-toolflow.readthedocs.io/en/latest/src/Installing-the-Toolflow.html, > but there might be a page we missed with old instructions. If there is one > with 2019.1 listed, can you let me know and I'll get it fixed. > > A few things you could try: > > 1) Edit the tcl script for the block diagram so it checks for version > 2019.1 instead of 2019.1.1 (a little risky, but it might work - > https://github.com/casper-astro/mlib_devel/blob/master/jasper_library/hdl_sources/infrastructure/red_pitaya.tcl > line 23) > 2) Regenerate the block diagram as the error message suggests (a bit more > effort than 1, but not too bad) > 3) Upgrading to 2019.1.1 should solve the problem. > > Cheers, > Jonathon > > > On Tue, 8 Sep 2020 at 22:13, Xavier Bosch <[email protected]> > wrote: > >> Hi all, >> >> I installed a fresh 16.04 Ubuntu with Xilinx Vivado 2019.1 and Matalb >> 2018a, as readthedocs suggested for the RedPitaya board. >> I am using the master branch from mlib_devel commit >> ee6841c5b6392e1a9e6b302e2edbe875034efdcf from Thu 28 May, 2020. >> >> I created the pithon3 virtual environment and installed the requirements >> As a comment my stratsg.local file is correctly populated except for the >> variable "XML2VHDL_PATH", that I do not know how to configure, it seems a >> new parameter to me. >> >> I succeeded in compiling an old SNAP design, no problems. Then I >> proceeded to do a new design inspired by the Wide-ish band Spectrometer >> Tutorial and I got an error message as follows (see screenshot): >> >> >> *ERROR: [BD_TCL-109] This script was generated using Vivado <2019.1.1> >> and is being run in <2019.1> of Vivado. Please run the script in Vivado >> <2019.1.1> then open the design in Vivado <2019.1>. Upgrade the design by >> running "Tools => Report => Report IP Status...", then run write_bd_tcl to >> create an updated script.* >> *WARNING: [Vivado 12-818] No files matched >> '/home/javierb/workspace/designs/rpitaya_test01/myproj/myproj.srcs/sources_1/bd/red_pitaya/red_pitaya.bd >> <http://red_pitaya.bd>'* >> *# generate_target all [get_files [get_property directory >> [current_project]]/myproj.srcs/sources_1/bd/red_pitaya/red_pitaya.bd >> <http://red_pitaya.bd>]* >> *WARNING: [Vivado 12-818] No files matched >> '/home/javierb/workspace/designs/rpitaya_test01/myproj/myproj.srcs/sources_1/bd/red_pitaya/red_pitaya.bd >> <http://red_pitaya.bd>'* >> *# make_wrapper -files [get_files [get_property directory >> [current_project]]/myproj.srcs/sources_1/bd/red_pitaya/red_pitaya.bd >> <http://red_pitaya.bd>] -top* >> *# add_files -norecurse [get_property directory >> [current_project]]/myproj.srcs/sources_1/bd/red_pitaya/hdl/red_pitaya_wrapper.vhd* >> *ERROR: [Vivado 12-172] File or Directory >> '/home/javierb/workspace/designs/rpitaya_test01/myproj/myproj.srcs/sources_1/bd/red_pitaya/hdl/red_pitaya_wrapper.vhd' >> does not exist* >> *INFO: [Common 17-206] Exiting Vivado at Tue Sep 8 14:32:38 2020...* >> *Traceback (most recent call last):* >> * File "/home/javierb/workspace/mlib_devel/jasper_library/exec_flow.py", >> line 226, in <module>* >> * synth_strat=opts.synth_strat, impl_strat=opts.impl_strat)* >> * File "/home/javierb/workspace/mlib_devel/jasper_library/toolflow.py", >> line 1834, in compile* >> * raise Exception('Vivado failed!')* >> *Exception: Vivado failed!**Error using jasper (line 23)* >> *Backend build failed! Check log files for more information * >> >> >> >> My understanding is that there is a conflict between the Vivado 19.1.1 >> and some other part that requires 19.1. >> I am confident I followed the installation steps recommended at >> readthedocs.com website. >> Have you seen an error like that before? Any idea what it could be? >> >> Thank you for your time, >> XB >> >> -- >> You received this message because you are subscribed to the Google Groups >> "[email protected]" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAMehrA1Jo7VJiBfGeiES1VNZbHZwR_Gc08C-o4WSbPjury2Jsg%40mail.gmail.com >> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAMehrA1Jo7VJiBfGeiES1VNZbHZwR_Gc08C-o4WSbPjury2Jsg%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups " > [email protected]" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAPU71P-wTYz3_jTX4G%2BL-AGombn5i7_be7u%3DvGj_i-37JRLSuA%40mail.gmail.com > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAPU71P-wTYz3_jTX4G%2BL-AGombn5i7_be7u%3DvGj_i-37JRLSuA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAMehrA3a7FqZiam6bwOMYccZ_VY9qwk-FgpzXd8_Hg4jVSt7Yw%40mail.gmail.com.
