hi hussam, i'm a bit confused about what you are trying to do:
are you seeking a board that connects FMC to QSFP+ ? several vendors make these boards. e.g.: http://www.hitechglobal.com/Accessories/FMC_Modules.htm i think you could adapt casper's 100Gbit ethernet block to drive the QSFP connector on one of these FMC boards. best wishes, dan On Sat, Sep 17, 2022 at 1:38 PM Hussam Abdellatif < abdellati...@northeastern.edu> wrote: > Hello Casper, > > We are very impressed with the work you have done in implementing > high-speed interface links to the FPGA boards. We recently finished > implementing a wireless communication system using an HTG RFSoC > <http://www.hitechglobal.com/Boards/Zynq_RFSoc.htm> board that utilizes > Xilinx Ultra-Scale FPGA (ZU28DR) that operates at 130 GHz over 8-10 GHz of > bandwidth. With this much bandwidth we can support +50Gbps bit rates and as > of now we are testing our system using a real-time random data generator. > What we would like, is to utilize the FMC slot available on-chip to enable > QSFP+ link in/out of the board. The idea is to have an interface, perhaps > connected to one end to a high-performance PC or Switch, and on the other > end to the RFSoC. Was wondering if I can get any ideas on this approach, > its feasibility, and what kind of cores are needed (or have already been > implemented and can be reused). Was also wondering if there are existing > IPs that we could adapt to our board/system. > > Best Regards, > Hussam Abdellatif > > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/2519c146-9b96-473f-ac89-c169bf61aa80n%40lists.berkeley.edu > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/2519c146-9b96-473f-ac89-c169bf61aa80n%40lists.berkeley.edu?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "casper@lists.berkeley.edu" group. To unsubscribe from this group and stop receiving emails from it, send an email to casper+unsubscr...@lists.berkeley.edu. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAGHS_vEZW8%2Bkz4g8AYa0b5VgFNhAgy%3DThBUOtAuPwM9LwOe8aA%40mail.gmail.com.
