Hi Indrajit, May I ask what is the environment in which you built the model?
And do you have a description of the model？ The model is not complete after I opened it. Regards Wang 在2023年3月8日星期三 UTC+8 15:20:54<Indrajit Barve> 写道： > Hi Wang, > > > Generally, I use Burst mode (Non continues ) of RAW voltage recording for > ADC testing and other testing, Herewith I shared the design file which > packs the raw voltage (iADC) into the 10 Gbe. > > > https://drive.google.com/file/d/17766ANxnbz9Um-RdTiUrtZl5KOQAhNqq/view?usp=sharing > > Thanks and regards > > Indrajit > > > On 08/03/23 12:41 pm, Wang wrote: > > Caution: This email originated outside IIA. > > Hi CASPER， > > I built the FX correlator using ROACH2 and GPU server. > > Now there is a problem, I want to save the raw data that the ADC board > outputs. I don't know how to do that. > > Has anyone thought about this problem or has a way to save ADC output data? > > I would appreciate a lot if you could reply me! > > BW！ > Wang > > -- > You received this message because you are subscribed to the Google Groups > "[email protected]" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/54ba6ed5-b3c6-4f85-911f-bce97fbfeb46n%40lists.berkeley.edu > > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/54ba6ed5-b3c6-4f85-911f-bce97fbfeb46n%40lists.berkeley.edu?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/e7b148c7-20d0-4b92-8948-511a5e0c94adn%40lists.berkeley.edu.
