Hi Jose, To change to a static IP requires updating the network interfaces configuration file at `/etc/network/interfaces.d/eth0`. That file should have an example of a static ip configuration that is commented out. First connect to the board using its dhcp address, or via a serial connection from the onboard micro USB port.
In that file configuration file, change the dhcp configuration: ``` auto eth0 iface eth0 inet dhcp ``` to a static IP configuration: ``` auto eth0 iface eth0 inet static address 192.168.2.100 netmask 255.255.255.0 ``` The address and netmask would need to be adjusted for your desired static configuration. Hope this helps, Mitch > On Nov 15, 2024, at 6:50 AM, Jose Vargas <[email protected]> wrote: > > Hello everyone, > > I am currently trying to fixing the IP address of my RFSoC4x2, but the board > is configured by default to use DHCP to receive automatically an IP address. > > Is there a way to assign manually a static IP address and boot the board with > that? > > Best regards, > José Vargas > > -- > You received this message because you are subscribed to the Google Groups > "[email protected]" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > To view this discussion visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/8fcb5867-6606-491a-b577-d953d2febc9en%40lists.berkeley.edu > > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/8fcb5867-6606-491a-b577-d953d2febc9en%40lists.berkeley.edu?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/5DD0DDAA-0D6A-4BA5-AB3A-9257D65FE331%40gmail.com.
