Thanks Alan and Neil, very useful. Please take my further thanks for granted on possible future inputs, so I don't clutter the list with messages like this. I'll write again when I have more substantial content,
Thanks, Jonathan On Wed, Nov 4, 2026 at 1:05 PM <[email protected]> wrote: > OpenEMS and Meep work on both Linux and Windows. > > > > *From:* salmon.na via [email protected] <[email protected]> > > *Sent:* 04 November 2026 17:44 > *To:* [email protected] > *Cc:* 'Jonathan Weintroub' <[email protected]> > *Subject:* RE: [casper] advanced analog simulation > > > > Dear Jonathan, > > > > A couple more opensource & free software packages for e/m simulations are > the FDTD programs are openEMS (already mentioned) from the University of > Duisburg-Essen and Meep from the Massachusetts Institute of Technology. > OpenEMS runs on Matlab or Octave and Meep runs with Python. I ran both of > these packages to work well after running through the tutorials. I chose > OpenEMS as it seem faster and went on to do quite simulation with this. > It’s a great program to say that’s it’s free. There’s quite a big user > group. I’m not sure if Duisburg-Essen supports the help group, I might have > moved to gitbub. for more detailed work. > > > > Cheers, Neil > > > > *From:* [email protected] <[email protected]> *On Behalf > Of *Alan Wilson-Langman > *Sent:* 04 November 2026 16:08 > *To:* [email protected] > *Cc:* Jonathan Weintroub <[email protected]> > *Subject:* Re: [casper] advanced analog simulation > > > > Hi Jonathan, > > Two more options worth a look for your colleague. > > Remcom’s XFdtd <https://www.remcom.com/xfdtd-3d-em-simulation-software> > is a full-wave 3D electromagnetic simulator based on FDTD. Remcom are very > supportive of academic research projects. If you or your colleague would > like to explore it, let me know and I’ll connect you. > > Also take a look at circuitRF > <https://github.com/potatobeanradio/circuitRF>. It brings together RF > circuit design, layout and electromagnetic simulation, including > connections to open-source tools such as openEMS, Palace and Gmsh. It looks > like a useful option to explore for the RF design workflow, although the > fit will depend on the specific PCB and signal-integrity requirements. > > Best, > Alan > > -- > > ------------------------------- > > CONFIDENTIALITY NOTICE: The contents of this email message and any > attachments are intended solely for the addressee(s) and may contain > confidential and/or privileged information and may be legally protected > from disclosure. If you are not the intended recipient of this message or > their agent, or if this message has been addressed to you in error, please > immediately alert the sender by reply email and then delete this message > and any attachments. If you are not the intended recipient, you are hereby > notified that any use, dissemination, copying, or storage of this message > or its attachments is strictly prohibited. > > > > On Wed, 04 Nov 2026 09:39:05 -0500, "'Weintroub, Jonathan' via > [email protected]" <[email protected]> wrote: > > Much thanks to Karl and Sias for thoughtful and helpful replies. Others, > please keep them coming. I am not the intended end user. Let me run these > ideas by them, and I'll ask any resulting questions, make connections as > kindly suggested, etc. Thanks, regards. Jonathan On Wed, Nov 4, 2026 at > 12:55 AM Sias Malan <[email protected]> wrote: > Hi Jonathan, > We do all > our PCB EM analysis work in CST > < > https://discover.3ds.com/test-and-validate-your-product-faster-simulia?_gl=1*2e541u*_up*MQ..*_gs*MQ..&gclid=CjwKCAiAqabXBhBUEiwAw_SQpaYGGb6zvmxNArtLE9whvGxBJ04G36tC7L19GyjaFWNeDYdaqugIQRoCapkQAvD_BwE&gbraid=0AAAAADqOeJRw3jefgq388GPBzJ3mS669z>. > > This is a full 3D simulator which we also use for designing RF components > > such as filters, couplers, OMTs and horns. The cost of this tool compared > > to tools like ANSYS, AWR or ADS is reasonable and justifiable in our case > > since we are using it for more than just PCB simulations. I am happy to > > give you a demo of what we do if you are interested. The pricing model > > for CST has not changed much in the last 6 years that we have been using > > it. We procure it in 3 year cycles. Our institute is not a university, > > but we have always benefitted from asking for discounts based on the fact > > that we are a purely non-profit research based organization. That has > > always given us some discount compared to the full commercial rates. > > We > also use another simulation package which recently changed the costing > > model similar to what you describe for Ansys. This prompted us to > > re-evaluate the use of this package and to compare it to the competitors. > > Our findings were that AWR > < > https://www.cadence.com/en_US/home/tools/system-analysis/rf-microwave-design.html>, > > ADS > < > https://www.keysight.com/us/en/lib/software-detail/computer-software/pathwave-advanced-design-system-ads-software-2212036.html>and > > ANSYS are all priced similarly and are all really expensive. We have used > SONET > <https://www.sonnetsoftware.com/>and Hyperlix > < > https://www.siemens.com/en-us/products/pcb/hyperlynx/>in the past but we > > have not been keeping up with their recent developments. It might be > worth > looking into SONET especially since they had a good university > program in > the past and their commercial rates were reasonable. > > The > only advice I have is to ask them nicely for a discount, exclude the > > packages you do not need and reduce the number of licenses. > > Hope this > helps > Sias > > > > On Tue, 3 Nov 2026 at 20:44, 'Weintroub, Jonathan' via > > [email protected] <[email protected]> wrote: > >> Hi > CASPERites, >> >> A colleague has a need for high frequency advanced PCB EM > wave and signal >> integrity simulation. These packages are favored: >> >> > https://ansys.synopsys.com/products/electronics/ansys-hfss >> < > https://ansys.synopsys.com/products/electronics/ansys-hfss> >> >> > https://ansys.synopsys.com/products/electronics/ansys-siwave >> < > https://ansys.synopsys.com/products/electronics/ansys-siwave> >> >> Ansys > was recently acquired by Synopsys, and in common with their >> products in > general, the above tools are subscription based, and, >> details aside, are > quite expensive--prohibitively so in our context I think. >> >> In the > distant past I arranged a membership of the Synopsys University >> Program > >> https://www.synopsys.com/academic-research/university.html >> At the > time we were interested in digital tools, which Synopsys was >> focused on > then I think. For example Synplicity for FPGA synthesis (as an >> > alternative to XST). We got a highly discounted subscription rate on the >> > license (and mixed experience with the tool, as it happens). >> >> Does > anyone have relevant experience or advice? Has anyone managed to >> get any > benefits from this university program? Anyhow get Ansys tools out >> of it? > >> >> And more broadly what do CASPER teams use for comparably > sophisticated >> simulation of high frequency hardware designs? >> >> > Thanks, >> Jonathan >> >> >> >> -- >> You received this message because you > are subscribed to the Google Groups >> "[email protected]" group. > >> To unsubscribe from this group and stop receiving emails from it, send > an >> email to [email protected]. >> To view this > discussion visit >> > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAPDrt24i7A1YJUGEq1%3D5z88sykzJ_gv-O74NoQiUbh9JHe1qqw%40mail.gmail.com > >> < > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAPDrt24i7A1YJUGEq1%3D5z88sykzJ_gv-O74NoQiUbh9JHe1qqw%40mail.gmail.com?utm_medium=email&utm_source=footer> > >> . >> > > > *Disclaimer* > > The information contained in this > communication from the sender is > confidential. It is intended solely for > use by the recipient and others > authorized to receive it. If you are not > the recipient, you are hereby > notified that any disclosure, copying, > distribution or taking action in > relation of the contents of this > information is strictly prohibited and may > be unlawful. > > -- > You > received this message because you are subscribed to the Google Groups " > > [email protected]" group. > To unsubscribe from this group and > stop receiving emails from it, send an > email to > [email protected]. > To view this discussion visit > > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAFkG%3Dd%3DuJQaG2LT8htHzuGneb1PZDOHOt%3D%3D%2BQhGntfEEWyQniQ%40mail.gmail.com > > < > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAFkG%3Dd%3DuJQaG2LT8htHzuGneb1PZDOHOt%3D%3D%2BQhGntfEEWyQniQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > > . > -- You received this message because you are subscribed to the Google > Groups "[email protected]" group. To unsubscribe from this group > and stop receiving emails from it, send an email to > [email protected]. To view this discussion visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAPDrt24SJk8SYJrnXx7S%3Dt0JZLFPCRKGpjuRWsKDVU70vnvXnw%40mail.gmail.com > . > > -- > You received this message because you are subscribed to the Google Groups " > [email protected]" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAB1E%2Bq9q3-ZQoUh2Q5JakjcDyzHfpdjeGu7pYEvF9ZC0Osp_bQ%40mail.gmail.com > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAB1E%2Bq9q3-ZQoUh2Q5JakjcDyzHfpdjeGu7pYEvF9ZC0Osp_bQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups " > [email protected]" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/000401dd6c84%241c0ab6d0%2454202470%24%40tiscali.co.uk > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/000401dd6c84%241c0ab6d0%2454202470%24%40tiscali.co.uk?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAPDrt25D_DAjC4TUZ1dmP%3Dn4NjCP4c9ZRB9u0-20S99me3XLdw%40mail.gmail.com.

