Rudy, nice summary and I'm glad to hear that the meter tops out at
40% and that you are not dessicated. I may take you up on that offer
in the spring.
Chris
At 09:47 PM 1/14/2006, you wrote:
All,
I finally have given the meter a good try out and believe that the
Chinese must have copied the higher end meter, since the one I have
seems to work swell.
Some readings, for expectations.
Piano bench 6% moisture
Oak diniing room table: 6%
Kitchen cutting board: 12%
My hand: 40+ % (the literature suggests that this is near the top of
the meteer's range.)
Now the interesting ones:
Companionway boards: 12% (teak, and rained on yeasterday)
Sliding salon top: 6%
Cockpit floor: 6%
Six inches aft of the stem fitting: 7% ( I had rebedded the stem
fitting 1 1/2 years ago)
1 1/2 foot aft of the stem fitting 16%
5" port and starboard of the mast step: 17%
These last two are right in line with the figures give me by my
surveyor, and I believe indicate a need for remedial action.
In all, and politics aside, I feel I can recommend the $150 meter.
and Harbor freight has a responsive return policy.
Operation is baby simple; battery is the common 9 volt battery, as
used in most smoke alarms.
Google Harbor Freight; search: moisture meter.
I'd be glad to set the meter to any boat reasonably near to Columbia
or Pasadena, MD
Rudy B.
Phoenix, #2237
Pasadena. MD
Rudolph S. Behar wrote:
Doug,
See my email to to Dave Breski for my situation with the meter. So
far I'm in the testing stage, or rather in the non-testing stage
because of the weather.
For me absolute accuracy is not all that important: I'm looking
for relative accuracy, to locate the wetter spots. I'll use the
sliding hatch-cover as a reference: I believe it is quite dry
inside. The four sensitivites may be useful, but they don't change
things much:
At the lowest sensitivity, my oak dining room table read 6%, at max
sensitivity, it reads14%. Dave may very well be right about my
meter, which is definitely low-end.
I'm planning to try out the meter on the boat this weekend. Will rreport.
Rudy
Doug Plotner wrote:
Rudy,
I didn't have luck with your link, but I did go onto
www.harborfreight.com, did a keyword search for "moisture" and
found the item I think you're talking about. The link I copied for it is:
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=93300
I noticed the description indicates that it has four scales for
various types of wood. Do you have any feel for what it's
accuracy might be for fiberglass, or for balsa sandwiched in fiberglass?
Thanks,
Doug Plotner
#6494 Dawg Daze
-----Original Message-----
From: "Rudolph S. Behar" <[EMAIL PROTECTED]>
Sent: Dec 13, 2005 8:47 AM
To: [email protected]
Subject: catalina27-talk: Harbor Freight Search Result Page
Hello,
For those who were interested in the non-contact ("non-destructive")
moisture meter from Harbor Freight, once again I think I've
figured out how to send a link. But it's true I've though that
two other times without being able to do so.
Herre's the current effort.
Rudy B.
Phoenix, #2237
Pasadena, MD
http://order.harborfreight.com/EasyAsk/harborfreight/results.jsp
