Sandpaper will!
Lance B. Jones _/)
Internet Account Representative
YELLOWPAGES.COM from AT&T
Bell South Advertising and Publishing Corporation
2247 Northlake Parkway-8th Floor
Tucker, Georgia 30084-4005
Phone: (678) 406-2531 Toll Free: (866) 213-2617
Fax: (770) 908-6213
Email: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
Visit our website @ www.yellowpages.com <http://www.yellowpages.com/>
-----Original Message-----
From: [email protected] [mailto:[EMAIL PROTECTED] On
Behalf Of James Calleran
Sent: Tuesday, January 02, 2007 4:01 PM
To: [email protected]
Subject: catalina27-talk: RE: PVC shroud covers
With all the talk about PVC has anyone found a way to get the
"printing" off of the pipe? I bought a couple of sections of 3/4 to use as
rollers for the genny & sheets; they have a line of red printing that runs the
length of the pipe. None of the usual solvents - alcohol, acetone, turps, etc.
- would remove it.
Fair winds,
Jim Calleran, BayBird, C27 #2784
Mathews Yacht Club, VA (37°27.8' N / 76°18.6' W)
http://www.mathewsyachtclub.com/
"Jones, Lance B" <[EMAIL PROTECTED]> wrote:
I'll try and remember. I just get standard PVC with and end cap
for each. I drill a hole through the end cap and insert the shroud through that
and re attach to the turnbuckle.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
*****
The information transmitted is intended only for the person or entity to which
it is addressed and may contain confidential, proprietary, and/or privileged
material. Any review, retransmission, dissemination or other use of, or taking
of any action in reliance upon this information by persons or entities other
than the intended recipient is prohibited. If you received this in error,
please contact the sender and delete the material from all computers. GA622
