Very fine sandpaper or 000 non-steel wool. -- Dave C27 #5212 Windabout Cape Cod http://dpbcc.home.comcast.net
-------------- Original message -------------- From: James Calleran <[EMAIL PROTECTED]> With all the talk about PVC has anyone found a way to get the "printing" off of the pipe? I bought a couple of sections of 3/4 to use as rollers for the genny & sheets; they have a line of red printing that runs the length of the pipe. None of the usual solvents alcohol, acetone, turps, etc. would remove it. Fair winds, Jim Calleran, BayBird, C27 #2784 Mathews Yacht Club, VA (37°27.8' N / 76°18.6' W) http://www.mathewsyachtclub.com/ "Jones, Lance B" <[EMAIL PROTECTED]> wrote: I'll try and remember. I just get standard PVC with and end cap for each. I drill a hole through the end cap and insert the shroud through that and re attach to the turnbuckle. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
