you could also try using buffing compound this will give you a shiny gloss as well if that is what you are looking for.
Date: Tue, 2 Jan 2007 13:00:33 -0800From: [EMAIL PROTECTED]: catalina27-talk: RE: PVC shroud coversTo: [EMAIL PROTECTED] all the talk about PVC has anyone found a way to get the "printing" off of the pipe? I bought a couple of sections of 3/4 to use as rollers for the genny & sheets; they have a line of red printing that runs the length of the pipe. None of the usual solvents — alcohol, acetone, turps, etc. — would remove it.Fair winds, Jim Calleran, BayBird, C27 #2784 Mathews Yacht Club, VA (37°27.8' N / 76°18.6' W) http://www.mathewsyachtclub.com/"Jones, Lance B" <[EMAIL PROTECTED]> wrote: I'll try and remember. I just get standard PVC with and end cap for each. I drill a hole through the end cap and insert the shroud through that and re attach to the turnbuckle. __________________________________________________Do You Yahoo!?Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _________________________________________________________________ Fixing up the home? Live Search can help. http://imagine-windowslive.com/search/kits/default.aspx?kit=improve&locale=en-US&source=wlmemailtaglinenov06
