You might look for a Harken 150 Cam Cleat with Extreme Angle Fairlead.
Joe McCary Aeolus II West River, MD [EMAIL PROTECTED] _____ From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Jeffery L. Sheler OK, rather than fiddle with the fiddle block (sorry), I've decided to put a cam cleat on the aft edge of the cabin top, starboard side, near the winch. That way, I don't have to change the routing of the main sheet, which currently runs from the mid-boom traveler to a block at the mast foot, over to a turning block, and back to the winch. A decisive factor for me was the cost of a new fiddle block with cam cleat attached (about $175 at WM). A cleat and bullseye cost me about $45. It should work fine. (fingers crossed.)
