My code must be old!!! ^_^ Dale
On Tue, Apr 8, 2008 at 3:49 PM, Roger <[EMAIL PROTECTED]> wrote: > Ok, I see, so it is really not supported anymore. Just wanted to make > sure that there is no "secret" how to match decnet :o) > > > > Regards > > > > Roger > > > > *Von:* Scott Morris [mailto:[EMAIL PROTECTED] > *Gesendet:* Dienstag, 8. April 2008 21:43 > *An:* 'Roger'; [email protected] > *Betreff:* RE: [OSL | CCIE_RS] V9 Task 5 Decnet not supported? > > > > Correct. That is being edited out at this point. I believe IPv6 was the > protocol that I went with instead. > > > > HTH, > > > > > Scott Morris, *CCIE**4** (R&S/ISP-Dial/Security/Service Provider) #4713, > JNCIE-M #153**, JNCIS-ER, CISSP, et al. > CCSI/JNCI-M/JNCI-ER > *VP - Technical Training - IPexpert, Inc. > IPexpert Sr. Technical Instructor > > [EMAIL PROTECTED] > > > > Telephone: +1.810.326.1444 > Fax: +1.810.454.0130 > http://www.ipexpert.com > > > > > ------------------------------ > > *From:* [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] *On Behalf Of *Roger > *Sent:* Tuesday, April 08, 2008 3:28 PM > *To:* [email protected] > *Subject:* [OSL | CCIE_RS] V9 Task 5 Decnet not supported? > > Hi all, > > On WB9 Task 5 priority queueing has to be configured. All Decnet traffic > has to be placed in the normal queue. Well, I cannot choose Decnet in the > protocol while configuring the priority-list. Has anyone an idea how else I > could match Decnet traffic? I'm using c2600-advipservicesk9-mz.124-18.bin. > > Thanks > > Roger >
