heheheeh.. No, no secret. The previous versions of IOS we used were Enterprise code. Now, to keep more inline with what Cisco is running we're running just Advanced IP Services. Of which, Decnet (thankfully) is not a part! Scott
_____ From: Roger [mailto:[EMAIL PROTECTED] Sent: Tuesday, April 08, 2008 3:49 PM To: [EMAIL PROTECTED]; [email protected] Subject: AW: [OSL | CCIE_RS] V9 Task 5 Decnet not supported? Ok, I see, so it is really not supported anymore. Just wanted to make sure that there is no "secret" how to match decnet :o) Regards Roger Von: Scott Morris [mailto:[EMAIL PROTECTED] Gesendet: Dienstag, 8. April 2008 21:43 An: 'Roger'; [email protected] Betreff: RE: [OSL | CCIE_RS] V9 Task 5 Decnet not supported? Correct. That is being edited out at this point. I believe IPv6 was the protocol that I went with instead. HTH, Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al. CCSI/JNCI-M/JNCI-ER VP - Technical Training - IPexpert, Inc. IPexpert Sr. Technical Instructor [EMAIL PROTECTED] Telephone: +1.810.326.1444 Fax: +1.810.454.0130 http://www.ipexpert.com _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roger Sent: Tuesday, April 08, 2008 3:28 PM To: [email protected] Subject: [OSL | CCIE_RS] V9 Task 5 Decnet not supported? Hi all, On WB9 Task 5 priority queueing has to be configured. All Decnet traffic has to be placed in the normal queue. Well, I cannot choose Decnet in the protocol while configuring the priority-list. Has anyone an idea how else I could match Decnet traffic? I'm using c2600-advipservicesk9-mz.124-18.bin. Thanks Roger
