1. As the solution guide shows together I would say that is something we will need to fix.
2. Correct 3. It is best practice to not use the broadcast keyword on a local frame-map but again the Lab is not always worrying about best practice. if it doesn't specifically say not to it can be done either way. There are some upcoming labs that it will specify only one way to do it but in other cases it may be more flexible. If you are concerned always ask the proctor. 4. The answer is right in the question. "this facility should be provided as long as there is avalid path between the hosts" Unless the loopback is used this requirement will not be met. 5. This needs to be updated. You are correct it is VLANG. This would be a place where you would want to ask. On Fri, May 16, 2008 at 12:17 AM, Louis S <[EMAIL PROTECTED]> wrote: > 1) > > When they have the vlan tables and they ask you to > name the vlan as "VLAN A" for example do they mean > "VLANA" WITHOUT the space? > > The switch won't let you put a space in the name. > > 2) > > When it tells you that 172.16.1.0/24 and 172.16.2.0/24 > should only appear in any routing table as a connected > route... > > Does that supersede the earlier requirement of having > full connectivity? > > 3) > > In the PG solutions for the frame-relay setup. When > they did the frame-relay maps at each of the routers, > why did they include the broadcast keyword on the > frame-relay map to their own routers address? > ie)from R2 > interface Serial0/1/0 > frame-relay map ip 151.11.26.6 206 broadcast > frame-relay map ip 151.11.26.2 206 broadcast > > I thought you weren't supposed to add the broadcast > keyword on a frame map to yourself.? > > 4) > > In the NTP section I didn't really see anything i the > requirement that led me to think i had to use the > loopbacks as a source, but the PG said you had to.. > > Can someone explain? > > "configure r5 and r4 to et clock information from r6. > r6 should have a stratum 2 less than default. updates > should be authenticated using a password of > "ipexpert-clock" this facility should be provided as > long as there is avalid path between the hosts." > > > 5) > > DHCP section > > It says to configure r9 to act as dhcp server to hosts > on vlanf which is (151.11.77.0/24) > but in the config the pool is for vlang > (151.11.89.0/24)... > > ??? > > sorry for all the questions guys! > > > > -- Tyson Scott - CCIE #13513 R&S and Security Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: [EMAIL PROTECTED] Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications.
