yes it is great. The file is perfect. However, the calculation of Idlepc value is very important and it is image specific. Otherwise CPU usage will go 100% even with two router instances.
Thanks Suresh On 7/1/08, Morris, Jason L. <[EMAIL PROTECTED]> wrote: > > > > http://www.spathas.net/dynamips/Dynamips-Dynagen_IPExpert_version_9.0_topology.rar > > > > gns3.net looks neat but it may be unnecessary for the IPExpert lab. Looks > like all the heavy lifting has been done already. This net file above has > been working great for me, the switches have some inherent problems as do > all dynamips builds but hey… its free…. > > > > > Jason Morris > > > ________________________________ > > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Dennis McGough > Sent: Monday, June 30, 2008 11:54 PM > To: [EMAIL PROTECTED]; [email protected] > Subject: Re: [OSL | CCIE_RS] IPExpert and Dynamips > > > > > Tony, > > The best one I've seen, the one that's easiest to use, is an integrated > package called GNS3. The installer comes with everything you need except IOS > images. > > GNS3.NET > > > As for using the labs from volume 1, I'm planning to do quite a bit of my > work on a Dynamips setup, so I'm hoping that much of it can be done in such > an environment. I expect that it can as long as it doesn't require the > generation of tons of traffic, as the Dynamips solutions are definitely CPU > bound to a few hundred PPS at most. > > Dennis > > > > > ________________________________ > > > > > Date: Mon, 30 Jun 2008 13:01:36 -0700 > > From: [EMAIL PROTECTED] > > To: [email protected] > > Subject: [OSL | CCIE_RS] IPExpert and Dynamips > > > > Hello people from the list. > > > > I was thinking about using Dynamips for my R&S CCIE Lab preparation since > I as far as I can tell, I could load it on my laptop and simulate a network > of Cisco 7200 Series routers and 3550 switches. Is this correct? I've read > about guys that study 97% of the time with this software and even passed the > test on the first try. > > > > If so, where can I get the source files to install this application? > > > > Also, has anybody here used the "CCIE R&S Lab Preparation Workbook: Volume > 1 (Focus Labs)" to study? If so, what do you think? Can this be used on > Dynamips? > > > > Thanks in advance! > > > > > >
