Ill have to check this out. Thanks Joe. So I guess technically a distribute-list prevents routs from getting into the rib not from the router receiving them?
Ed, From: Joe Astorino [mailto:[email protected]] Sent: Wednesday, July 22, 2009 3:35 PM To: Bodnar, Edward Cc: khaled Saholy; [email protected] Subject: Re: [OSL | CCIE_RS] VOL3 LAB7 OSPF Filtering - question to the experts Guys be extremely careful with the distribute-list command in OSPF. Check out this FAQ from Cisco for more information. Remember, it is link-state so the LSDB must be the same across the area! http://www.cisco.com/en/US/tech/tk365/technologies_q_and_a_item09186a0080094704.shtml#q12 On Wed, Jul 22, 2009 at 3:28 PM, Bodnar, Edward <[email protected]<mailto:[email protected]>> wrote: I would say as long and you look in your route table and you only see odd routs then your ok. As long as they are not requiring you to use a "prefix-list" you can do anything that works. I always try to do the easy way unless I am forced not to. Standard ACL's matched with distribute-list are what I use unless I have a reason not to. Ed, From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of khaled Saholy Sent: Wednesday, July 22, 2009 3:23 PM To: [email protected]<mailto:[email protected]> Subject: [OSL | CCIE_RS] VOL3 LAB7 OSPF Filtering - question to the experts Dear Experts, I have some questions regading the VOL3 labs. So I'll start with lab7. In lab 7 , task 3.5 , the task is asking for R9 to receive only even routes from BB2 via serial 0/2/0 only and the odd routes via serial 0/2/1 only. The solutions in the proctor guide has been configured in R6 with two long prefix-lists. I did the configuration in R9 with the (distribute-list in) with the access-lists and it gave me the same result. Is my solution correct ? Thanks for the reply in advance. Khaled Al-Saholy ________________________________ See all the ways you can stay connected to friends and family<http://www.microsoft.com/windows/windowslive/default.aspx> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com> -- Regards, Joe Astorino - CCIE #24347 R&S Technical Instructor - IPexpert, Inc. Cell: +1.586.212.6107 Fax: +1.810.454.0130 Mailto: [email protected]<mailto:[email protected]>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
