Vikas,

Have you opened the .NET file in notepad or wordpad and verified that you've
configured the exact same router type and IOS revision that's listed there?
If you used a different IOS revision and router type, did you edit the .NET
file to match?

HTH,

Jeff


On Thu, Oct 8, 2009 at 7:03 AM, Vikas Sharma <[email protected]> wrote:

> Hi Everyone,
>
> Can you let me know why I am unable to open the IPEXPERT NET file in GNS
> under UBUNTU? I have verified that Dynamips is running, IOS images path is
> mapped in GNS. I cannot open the net file. Any help will be much
> appreciated.
>
> Regards,
>
> Vikas.
>
>
> On Thu, Oct 8, 2009 at 2:45 PM, Vikas Sharma <[email protected]> wrote:
>
>> Hi Mitch,
>>
>> Thanks a lot. It was simply incredible. I loaded Ubuntu in no time at all
>> and with 1 simple command you mentioned below, GNS3 was up and running in 15
>> minutes. So uncomplicated and straight forward. Manny, this is the best way
>> to go. I'll load up the IPEXPERT lab and start up all devices and take a
>> look at CPU utilization. But setup wise it was a breeze.
>>
>> Once again, thanks a lot for your sharing.
>>
>> Cheers,
>>
>> Vikas.
>>
>> On Wed, Oct 7, 2009 at 5:06 AM, Mitch Peterson <
>> [email protected]> wrote:
>>
>>> Redhat is a good distro, but Ubuntu has a much better community for
>>> support.  I'd recommend using it instead if you can.  Installing GNS3 on
>>> Ubuntu is ridiculously easy it's "sudo apt-get install gns3".
>>> The installation documentation is pretty good, it can be found at
>>> https://help.ubuntu.com/9.04/installation-guide/index.html & the support
>>> forums at http://ubuntuforums.org.  A word of advise though, read the
>>> faqs before asking something, they tend to get a snippy if you ask a
>>> question that's been answered 100 times.
>>>
>>> Mitch
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> For more information regarding industry leading CCIE Lab training, please
>>> visit www.ipexpert.com
>>>
>>>
>>
>>
>> --
>> Vikas Sharma
>> Network Specialist
>> Fujitsu Australia
>> (M): 0421 052 117
>>
>
>
>
> --
> Vikas Sharma
> Network Specialist
> Fujitsu Australia
> (M): 0421 052 117
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to