Vikas,
I'm sure that's the problem.I've seen this before myself. As soon as the IOS file name exactly matches between your GNS3 config and the .NET file, if everything else matches, it'll work for you. Jeff From: Vikas Sharma [mailto:[email protected]] Sent: Friday, October 09, 2009 10:38 PM To: Jeffrey Hall Cc: [email protected]; Mitch Peterson Subject: Re: [OSL | CCIE_RS] processor usage in GNS3 Hi Jeff, That's the bit I've not yet done. Only the IOS is different but router types are same. I'll do it and verify with you. Thanks, Vikas. On Sat, Oct 10, 2009 at 7:48 AM, Jeffrey Hall <[email protected]> wrote: Vikas, Have you opened the .NET file in notepad or wordpad and verified that you've configured the exact same router type and IOS revision that's listed there? If you used a different IOS revision and router type, did you edit the .NET file to match? HTH, Jeff On Thu, Oct 8, 2009 at 7:03 AM, Vikas Sharma <[email protected]> wrote: Hi Everyone, Can you let me know why I am unable to open the IPEXPERT NET file in GNS under UBUNTU? I have verified that Dynamips is running, IOS images path is mapped in GNS. I cannot open the net file. Any help will be much appreciated. Regards, Vikas. On Thu, Oct 8, 2009 at 2:45 PM, Vikas Sharma <[email protected]> wrote: Hi Mitch, Thanks a lot. It was simply incredible. I loaded Ubuntu in no time at all and with 1 simple command you mentioned below, GNS3 was up and running in 15 minutes. So uncomplicated and straight forward. Manny, this is the best way to go. I'll load up the IPEXPERT lab and start up all devices and take a look at CPU utilization. But setup wise it was a breeze. Once again, thanks a lot for your sharing. Cheers, Vikas. On Wed, Oct 7, 2009 at 5:06 AM, Mitch Peterson <[email protected]> wrote: Redhat is a good distro, but Ubuntu has a much better community for support. I'd recommend using it instead if you can. Installing GNS3 on Ubuntu is ridiculously easy it's "sudo apt-get install gns3". The installation documentation is pretty good, it can be found at https://help.ubuntu.com/9.04/installation-guide/index.html & the support forums at http://ubuntuforums.org <http://ubuntuforums.org/> . A word of advise though, read the faqs before asking something, they tend to get a snippy if you ask a question that's been answered 100 times. Mitch _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com <http://www.ipexpert.com/> -- Vikas Sharma Network Specialist Fujitsu Australia (M): 0421 052 117 -- Vikas Sharma Network Specialist Fujitsu Australia (M): 0421 052 117 _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com <http://www.ipexpert.com/> -- Vikas Sharma Network Specialist Fujitsu Australia (M): 0421 052 117
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
