I tried and i extracted downloaded GNS to tmp foldere then i followed the steps
you advised before but it is not installed yet, following are the messages.
manouch...@manouchehrsh-laptop:~$ cd tmp
manouch...@manouchehrsh-laptop:~/tmp$ pwd
/home/manouchehr/tmp
manouch...@manouchehrsh-laptop:~/tmp$ tar xvf GNS3-0.6.1-src.tar.gz
tar: GNS3-0.6.1-src.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
manouch...@manouchehrsh-laptop:~/tmp$ cd GNS3-0.6.1-src
bash: cd: GNS3-0.6.1-src: No such file or directory
manouch...@manouchehrsh-laptop:~/tmp$ sudo python setup.py install
running install
running build
running build_py
running build_scripts
running install_lib
running install_scripts
changing mode of /usr/bin/gns3 to 755
running install_egg_info
Removing /usr/lib/python2.5/site-packages/GNS3-0.6.1.egg-info
Writing /usr/lib/python2.5/site-packages/GNS3-0.6.1.egg-info
manouch...@manouchehrsh-laptop:~/tmp$
manouch...@manouchehrsh-laptop:~/tmp$
manouch...@manouchehrsh-laptop:~/tmp$
waiting for your reply,
Date: Sat, 17 Oct 2009 19:35:21 +0300
Subject: Re: [OSL | CCIE_RS] GNS3 Installation on Ubuntu - 64bit
From: andy.petre...@gmail.com
To: manouchehr.om...@hotmail.com
CC: duleep.pil...@gmail.com; vshar...@gmail.com; ccie_rs@onlinestudylist.com
so, for example before download make some dir. for examle:1) cd ~2) mkdir tmp3)
cd tmp4) pwdand you will see directory where you are standing now.5) put in
this dir some files.
2009/10/17 MANNY Omari <manouchehr.om...@hotmail.com>
Hello Andrey, Thanks alot, Can you
please tell me where to extract/save these files once downloaded?
Becaues i cannot paste/extract/save any file in filesystem.
Kind Regards
Date: Sat, 17 Oct 2009 18:57:27 +0300
Subject: Re: [OSL | CCIE_RS] GNS3 Installation on Ubuntu - 64bit
From: andy.petre...@gmail.com
To: manouchehr.om...@hotmail.com
CC: duleep.pil...@gmail.com; vshar...@gmail.com; ccie_rs@onlinestudylist.com
1) wget 'http://downloads.sourceforge.net/gns-3/GNS3-0.6.1-src.tar.gz?download'
2) tar xvf GNS3-0.6.1-src.tar.gz3) cd GNS3-0.6.1-src
4) sudo python setup.py installthat's all.
2009/10/17 MANNY Omari <manouchehr.om...@hotmail.com>
Hello, i have Installed Ubuntu 8.x
64bit and i found GNS3 installtion on Ubuntu 7.x
“http://www.blindhog.net/gns3-installation-tutorial-for-linux/”
but the thing is that it doesn't show the location of Python-qt4 I'm
just stucked there, I have downloaded Python-qt4 but don't know where
to paste the file, i cannot paste file in filesystem if i take the
properties > permission it says “the permission of “/”
determind. Any help please will be highly appreciated.
Best Regards
From: duleep.pil...@gmail.com
Date: Thu, 15 Oct 2009 21:16:28 -0700
Subject: Fwd: [OSL | CCIE_RS] GNS3 Installation on Ubuntu - 64bit
To: vshar...@gmail.com; manouchehr.om...@hotmail.com
Guys,
Try these steps. Should be simple. Mine worked after just editing sources.list
and an update which included gns3 also.
-Duleep
---------- Forwarded message ----------
From: Justin Mitchell <jgmitch...@gmail.com>
Date: Thu, Oct 15, 2009 at 11:01 AM
Subject: Re: [OSL | CCIE_RS] GNS3 Installation on Ubuntu - 64bit
To: Duleep Pillai <duleep.pil...@gmail.com>
Follow the instructions here: http://gpl.code.de/oswiki/GplcodedeApt
But use the following changes:
Update your sources.list for Ubuntu
Append the following lines to your /etc/apt/sources.list:
# gpl.code.de
deb http://gpl.code.de/ubuntu jaunty/
deb-src http://gpl.code.de/ubuntu jaunty/
Once you have made the changes, check for updates, you should get the
latest and greatest version that way.
Justin G. Mitchell
http://www.google.com/profiles/jgmitchell
On Thu, Oct 15, 2009 at 12:58 PM, Duleep Pillai <duleep.pil...@gmail.com> wrote:
> Can you tell me how to do that? I tried update and it did not find any.
>
> Thanks,
>
> On Thu, Oct 15, 2009 at 10:29 AM, Justin Mitchell <jgmitch...@gmail.com>
> wrote:
>>
>> Make sure you install the updates from the GNS3 site. I had the same
>> problems until I installed them.
>>
>> Justin G. Mitchell
>> Sent from my G1 mobile phone
>>
>> On Oct 15, 2009 12:02 PM, "Duleep Pillai" <duleep.pil...@gmail.com> wrote:
>>
>> Hi All,
>>
>> Sorry for asking the same question again. Could not find a solution for
>> this in the archives.
>>
>> I just installed a 64bit Ubuntu and am trying to run gns3. I cannot open
>> the .net file pasted below (which is a customized IPExpert file). There is
>> no error message. However, the same file is working on a 32 bit installation
>> on a different machine.
>>
>> I can create a new project, but unable to save it either. Is there any
>> permissions issue which I missed? I used the default installation process
>> for Ubuntu and "sudo apt-get install gns3" for installing GNS3.
>>
>>
>> Thanks,
>> Duleep
>>
>> autostart = False
>> [localhost:7202]
>> workingdir = /home/duleep/DYNAMIPS/Working
>> udp = 10200
>> [[3725]]
>> ghostios = True
>> image =
>> /home/duleep/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T10.bin.unpacked
>> ram = 256
>> sparsemem = True
>> idlepc = 0x614ab070
>> [[ROUTER R6]]
>> model = 3725
>> console = 2006
>> idlepc = 0x614ab0cc
>> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R6.cfg
>> s0/1 = FR-Switch 6
>> f0/0 = Cat2 f1/6
>> f0/1 = Cat4 f1/6
>> slot2 = NM-4T
>> s2/0 = R9 s2/0
>> s2/1 = R9 s2/1
>> x = 48.0
>> y = -37.0
>> [[ROUTER R7]]
>> model = 3725
>> console = 2007
>> idlepc = 0x6026b438
>> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R7.cfg
>> s0/0 = R8 s0/0
>> f0/0 = Cat2 f1/7
>> f0/1 = Cat4 f1/7
>> x = -103.0
>> y = 365.0
>> [[ROUTER R8]]
>> model = 3725
>> console = 2008
>> idlepc = 0x62b200d8
>> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R8.cfg
>> s0/0 = R7 s0/0
>> f0/0 = Cat2 f1/8
>> f0/1 = Cat4 f1/8
>> x = -304.0
>> y = 359.0
>> [[ROUTER R9]]
>> model = 3725
>> console = 2009
>> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R9.cfg
>> f0/0 = Cat2 f1/9
>> f0/1 = Cat4 f1/9
>> slot2 = NM-4T
>> s2/0 = R6 s2/0
>> s2/1 = R6 s2/1
>> x = 261.0
>> y = 331.0
>> [localhost:7203]
>> workingdir = /home/duleep/DYNAMIPS/Working
>> udp = 10300
>> [[3725]]
>> ghostios = True
>> image =
>> /home/duleep/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T10.bin.unpacked
>> ram = 256
>> sparsemem = True
>> idlepc = 0x60c06d20
>> [[ROUTER Cat1]]
>> model = 3725
>> console = 2010
>> idlepc = 0x60c059a8
>> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/Cat1.cfg
>> slot1 = NM-16ESW
>> f1/0 = Cat2 f1/0
>> f1/1 = R1 f0/0
>> f1/2 = R2 f1/0
>> f1/4 = R4 f0/0
>> f1/5 = R5 f0/0
>> f1/9 = BB1 e0/0
>> f1/10 = Cat4 f1/10
>> f1/11 = Cat4 f1/11
>> f1/12 = Cat3 f1/12
>> f1/13 = Cat3 f1/13
>> f1/14 = Cat2 f1/14
>> f1/15 = Cat2 f1/15
>> x = -35.0
>> y = 95.0
>> [[ROUTER Cat2]]
>> model = 3725
>> console = 2014
>> idlepc = 0x6026b804
>> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/Cat2.cfg
>> slot1 = NM-16ESW
>> f1/0 = Cat1 f1/0
>> f1/1 = R1 f0/1
>> f1/2 = BB2 e0/0
>> f1/3 = BB3 e0/0
>> f1/6 = R6 f0/0
>> f1/7 = R7 f0/0
>> f1/8 = R8 f0/0
>> f1/9 = R9 f0/0
>> f1/10 = Cat3 f1/10
>> f1/11 = Cat3 f1/11
>> f1/12 = Cat4 f1/12
>> f1/13 = Cat4 f1/13
>> f1/14 = Cat1 f1/14
>> f1/15 = Cat1 f1/15
>> x = -39.0
>> y = 227.0
>> [[ROUTER Cat3]]
>> model = 3725
>> console = 2015
>> idlepc = 0x62b22904
>> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/Cat3.cfg
>> slot1 = NM-16ESW
>> f1/2 = R2 f1/1
>> f1/4 = R4 f0/1
>> f1/5 = R5 f0/1
>> f1/10 = Cat2 f1/10
>> f1/11 = Cat2 f1/11
>> f1/12 = Cat1 f1/12
>> f1/13 = Cat1 f1/13
>> f1/14 = Cat4 f1/14
>> f1/15 = Cat4 f1/15
>> x = -211.0
>> y = 91.0
>> [[ROUTER Cat4]]
>> model = 3725
>> console = 2016
>> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/Cat4.cfg
>> slot1 = NM-16ESW
>> f1/6 = R6 f0/1
>> f1/7 = R7 f0/1
>> f1/8 = R8 f0/1
>> f1/9 = R9 f0/1
>> f1/10 = Cat1 f1/10
>> f1/11 = Cat1 f1/11
>> f1/12 = Cat2 f1/12
>> f1/13 = Cat2 f1/13
>> f1/14 = Cat3 f1/14
>> f1/15 = Cat3 f1/15
>> x = -212.0
>> y = 224.0
>> [localhost:7201]
>> workingdir = /home/duleep/DYNAMIPS/Working
>> udp = 10100
>> [[3725]]
>> ghostios = True
>> image =
>> /home/duleep/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T10.bin.unpacked
>> ram = 256
>> sparsemem = True
>> idlepc = 0x60c05928
>> [[ROUTER R4]]
>> model = 3725
>> console = 2004
>> idlepc = 0x614ac21c
>> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R4.cfg
>> s0/1 = FR-Switch 4
>> f0/0 = Cat1 f1/4
>> f0/1 = Cat3 f1/4
>> x = 48.0
>> y = -149.0
>> [[ROUTER R5]]
>> model = 3725
>> console = 2005
>> idlepc = 0x62b22904
>> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R5.cfg
>> s0/1 = FR-Switch 5
>> s0/2 = R2 s0/2
>> f0/0 = Cat1 f1/5
>> f0/1 = Cat3 f1/5
>> x = -336.0
>> y = -28.0
>> [[ROUTER R1]]
>> model = 3725
>> console = 2001
>> idlepc = 0x62b200d8
>> cnfg =/home/duleep/DYNAMIPS/Startup_Configs/R1.cfg
>> f0/0 = Cat1 f1/1
>> f0/1 = Cat2 f1/1
>> x = 91.0
>> y = 163.0
>> [[ROUTER R2]]
>> model = 3725
>> console = 2002
>> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R2.cfg
>> s0/1 = FR-Switch 2
>> s0/2 = R5 s0/2
>> slot1 = NM-16ESW
>> f1/0 = Cat1 f1/2
>> f1/1 = Cat3 f1/2
>> x = -333.0
>> y = -169.0
>> [localhost:7204]
>> workingdir = /home/duleep/DYNAMIPS/Working
>> udp = 10400
>> [[2610]]
>> image =
>> /home/duleep/DYNAMIPS/IMAGES/c2600-jk9s-mz.122-23.bin.unpacked
>> idlepc = 0x803d0d18
>> ghostios = True
>> sparsemem = True
>> chassis = 2610
>> [[FRSW FR-Switch]]
>> 2:204 = 4:402
>> 2:205 = 5:502
>> 2:206 = 6:602
>> 2:214 = 4:412
>> 2:215 = 5:512
>> 2:216 = 6:612
>> 2:224 = 4:422
>> 2:225 = 5:522
>> 2:226 = 6:622
>> 4:402 = 2:204
>> 4:405 = 5:504
>> 4:406 = 6:604
>> 4:412 = 2:214
>> 4:415 = 5:514
>> 4:416 = 6:614
>> 4:422 = 2:224
>> 4:425 = 5:524
>> 4:426 = 6:624
>> 5:502 = 2:205
>> 5:504 = 4:405
>> 5:506 = 6:605
>> 5:512 = 2:215
>> 5:514 = 4:415
>> 5:516 = 6:615
>> 5:522 = 2:225
>> 5:524 = 4:425
>> 5:526 = 6:625
>> 6:602 = 2:206
>> 6:604 = 4:406
>> 6:605 = 5:506
>> 6:612 = 2:216
>> 6:614 = 4:416
>> 6:615 = 5:516
>> 6:622 = 2:226
>> 6:624 = 4:426
>> 6:625 = 5:526
>> x = -159.5
>> y = -91.5
>> [[ROUTER BB3]]
>> model = 2610
>> console = 2013
>> idlepc = 0x802f9ab4
>> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/BB1.cfg
>> e0/0 = Cat2 f1/3
>> x = 9.0
>> y = 365.0
>> [[ROUTER BB2]]
>> model = 2610
>> console = 2012
>> idlepc = 0x802f9a80
>> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/BB2.cfg
>> e0/0 = Cat2 f1/2
>> x = 137.0
>> y = 366.0
>> [[ROUTER BB1]]
>> model = 2610
>> console = 2011
>> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/BB3.cfg
>> e0/0 = Cat1 f1/9
>> x = 255.0
>> y = 85.0
>> [GNS3-DATA]
>> configs = /home/duleep/DYNAMIPS/Startup_Configs
>> workdir = /home/duleep/DYNAMIPS/Working
>> m11 = 0.5
>> m22 = 0.5
>>
>>
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>
>
Windows Live Hotmail: Your friends can get your Facebook updates, right from
Hotmail®.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
--
With best regards,
Andrey 'sshd' Petrenko
xmmp: sshd at jabber.org
gtalk: andy.petrenko at gmail.com
skype: andy.petrenko
web: http://sshd.by
Windows Live: Friends get your Flickr, Yelp, and Digg updates when they e-mail
you.
--
With best regards,
Andrey 'sshd' Petrenko
xmmp: sshd at jabber.org
gtalk: andy.petrenko at gmail.com
skype: andy.petrenko
web: http://sshd.by
_________________________________________________________________
Windows Live Hotmail: Your friends can get your Facebook updates, right from
Hotmail®.
http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_4:092009_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
