Hi Steve,
the problem just start fro me there.If redistr. or filtering is now working
how can I go with it.Just only checking config .I want to do something else
to go step by step.As below I try to send a default route to my bgp
neighbor.Maybe I got the concept wrong or my config is wrong.But I can not
trooblshoot with it.
R2#sh access-lists
*Standard IP access list 2
10 permit 12.2.0.0*
R2#sh ro
R2#sh rout
R2#sh route-map
*route-map r2, permit, sequence 10*
Match clauses:
i*p address (access-lists): 2 *
Set clauses:
Policy routing matches: 0 packets, 0 bytes
R2#sh run | s bgp
router bgp 65502
no synchronization
no bgp fast-external-fallover
bgp log-neighbor-changes
network 2.0.0.0
neighbor 10.1.12.1 remote-as 65501
neighbor 10.1.12.1 timers 60 300
* neighbor 10.1.12.1 default-originate route-map r2*
neighbor 10.1.23.3 remote-as 444
neighbor 10.1.23.3 timers 60 300
no auto-summary
R2#
On Tue, Mar 16, 2010 at 9:24 PM, Di Bias, Steve <[email protected]>wrote:
> Hello,
>
>
>
> If your route-map was used in redistribution then you were filtering routes
> or changing metrics, etc. If that’s the case you should be able to see if
> the routes show ip in the routing tables and if they look correct or not.
> Some of the other guys may no more than I do in this area but that’s how I
> would check.
>
>
>
> Steve
>
>
> ------------------------------
>
> *From:* [email protected] [mailto:
> [email protected]] *On Behalf Of *Mustafa Yadav
> *Sent:* Tuesday, March 16, 2010 12:17 PM
> *To:* ccie_rs
> *Subject:* [OSL | CCIE_RS] troobleshooting in route-map
>
>
>
> Hi guys,
>
> Can someone tell me how to troobleshooting in route-map ?
> I have configured an access-list and in route-map via match criteria I
> cathed these packet and let 's say I used this route-map in redistrubution.
> which command help me out to find the problem if it is not working?
>
> -Any command to see that that packets match for that route-map?
>
>
>
> UHS Confidentiality Notice: This e-mail message, including any attachments,
> is for the sole use of the intended recipient(s) and may contain
> confidential and privileged information. Any unauthorized review, use,
> disclosure or distribution of this information is prohibited, and may be
> punishable by law. If this was sent to you in error, please notify the
> sender by reply e-mail and destroy all copies of the original message.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
