Not a great start! My first lab... :( All going well, time consuming as I get used to translating interface references to the dynamips topology, but second guessing the intended mistakes and all good.
However get to task 1.5 and I am setting up ip's frame relay, Ethernet etc then hit a glitch! I can't ping from R5 to R6. Each can ping itself, I checked connected correctly and right config etc.. This is not due to the trunk config as I already caught this previous and configured one of the links as dot1q trunk. On further investigation, I found that cat 5 is not learning a mac address for R5. Can see it in cdp, on correct ports etc, but no mac in table. Restarted the switch, no joy. Even tried static mac table entry, with static arp and clan int on cat1 but no joy. Pretty certain therefore that this Gns/dynamips issue. Question is therefore how do I try to resolve? This is going to really scupper my labs! On another note, out of sanity I checked the Dsg in case I missed something, and it only suggested configuring the trunk at this point. I configured the trunk in the vtp section, as vtp wouldn't propogate without this. ?? Thanks Sent from my iPhone _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
