hi Tyson, yes, it is still 2 x NM-16ESW in .net file. I searched and found the forum's version to convert it.
On Thu, Mar 18, 2010 at 4:11 AM, Tyson Scott <[email protected]> wrote: > If you are still using a .net file with the two NM-16ESW's you are using an > old version. I changed this June of last year. Is that what is still being > uploaded into student accounts? > > Regards, > > Tyson Scott - CCIE #13513 R&S, Security, and SP > Technical Instructor - IPexpert, Inc. > Mailto: [email protected] > Telephone: +1.810.326.1444, ext. 208 > Live Assistance, Please visit: www.ipexpert.com/chat > eFax: +1.810.454.0130 > > IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, > Audio Tools, Online Hardware Rental and Classroom Training for the Cisco > CCIE (R&S, Voice, Security & Service Provider) certification(s) with > training locations throughout the United States, Europe, South Asia and > Australia. Be sure to visit our online communities at > www.ipexpert.com/communities and our public website at www.ipexpert.com > > > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of LJ > Sent: Wednesday, March 17, 2010 11:42 AM > To: Mark Beynon; [email protected] > Subject: Re: [OSL | CCIE_RS] Vol1, lab1, task1.5 GNS3 issue? > > Yes it is. > > You might check this net file I use on macosx to see an example of a good > working dynamips pod. I also wrote a small script to automatically convert > the router and switch configuration files to dynamips compatible. > > > > On Wed, 17 Mar 2010 15:53:00 +0000 > Mark Beynon <[email protected]> wrote: > : I believe this is caused by having two ns-16esw in the router. Looking > : at fixes at the moment! > : > : Sent from my iPhone > : > : On 17 Mar 2010, at 10:19, Mark Beynon <[email protected]> wrote: > : > : > Not a great start! My first lab... :( > : > > : > All going well, time consuming as I get used to translating interface > : > references to the dynamips topology, but second guessing the intended > : > mistakes and all good. > : > > : > However get to task 1.5 and I am setting up ip's frame relay, Ethernet > : > etc then hit a glitch! I can't ping from R5 to R6. Each can ping > : > itself, I checked connected correctly and right config etc.. This is > : > not due to the trunk config as I already caught this previous and > : > configured one of the links as dot1q trunk. > : > > : > On further investigation, I found that cat 5 is not learning a mac > : > address for R5. Can see it in cdp, on correct ports etc, but no mac in > : > table. Restarted the switch, no joy. Even tried static mac table > : > entry, with static arp and clan int on cat1 but no joy. > : > > : > Pretty certain therefore that this Gns/dynamips issue. Question is > : > therefore how do I try to resolve? This is going to really scupper my > : > labs! > : > > : > On another note, out of sanity I checked the Dsg in case I missed > : > something, and it only suggested configuring the trunk at this point. > : > I configured the trunk in the vtp section, as vtp wouldn't propogate > : > without this. ?? > : > > : > Thanks > : > > : > Sent from my iPhone > : > _______________________________________________ > : > For more information regarding industry leading CCIE Lab training, > : > please visit www.ipexpert.com > : _______________________________________________ > : For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
