I'm not sure there is an answer for this but take this bit of MPLS VPN config:
ip vrf CAT2 rd 11:11 route-target export 11:1100 route-target import 8:800 ! ip vrf R7 rd 7:7 route-target export 1:100 route-target import 2:200 Now this refers to 2 VRF configurations with route-targets configured. In my mockup on the lab topology basically this configuration is on my R2 - the whole thing works just as I expect it to and on the other PE router at the other side of my network I can complete the VPN to the other CE router as intended. My question is - where can I see the extended communities or the 'route-targets' via a show command reflected in the mpls forwarding table or in the BGP route table? I hope that question is clear - what I'm looking for - is there a show command that will show me the 11:1100 for example in the prefix advertisement in MP-BGP? Maybe that was a better way to ask it... I'll do my best to clarify if I can. Thanks, -mike _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
