Hey All,
I have configured this a little different and I am wondering if I would have
scored the points or am I missing something
The concern is R9 - I just used it to leverage MSDP and did not configure
any interface with PIM nor did I configure it as a RP.
#############
My configuration
#############
R9 (This is all that I have configured on R9)
__
ip multicast-routing
ip msdp peer 166.14.14.14 connect-source Loopback0
ip msdp peer 166.4.4.4 connect-source Loopback0
ip msdp originator-id Loopback0
R9(config)#do sh ip msdp peer
MSDP Peer 166.14.14.14 (?), AS 78
Connection status:
State: Up, Resets: 0, Connection source: Loopback0 (166.9.9.9)
Uptime(Downtime): 00:15:52, Messages sent/received: 38/19
Output messages discarded: 0
Connection and counters cleared 00:18:23 ago
SA Filtering:
Input (S,G) filter: none, route-map: none
Input RP filter: none, route-map: none
Output (S,G) filter: none, route-map: none
Output RP filter: none, route-map: none
SA-Requests:
Input filter: none
Peer ttl threshold: 0
SAs learned from this peer: 0
Input queue size: 0, Output queue size: 0
MD5 signature protection on MSDP TCP connection: not enabled
Message counters:
RPF Failure count: 0
SA Messages in/out: 5/5
SA Requests in: 0
SA Responses out: 0
Data Packets in/out: 2/0
MSDP Peer 166.4.4.4 (?), AS 456
Connection status:
State: Up, Resets: 0, Connection source: Loopback0 (166.9.9.9)
Uptime(Downtime): 00:17:33, Messages sent/received: 21/39
Output messages discarded: 0
Connection and counters cleared 00:18:10 ago
SA Filtering:
Input (S,G) filter: none, route-map: none
Input RP filter: none, route-map: none
Output (S,G) filter: none, route-map: none
Output RP filter: none, route-map: none
SA-Requests:
Input filter: none
Peer ttl threshold: 0
SAs learned from this peer: 0
Input queue size: 0, Output queue size: 0
MD5 signature protection on MSDP TCP connection: not enabled
Message counters:
RPF Failure count: 0
SA Messages in/out: 25/4
SA Requests in: 0
SA Responses out: 0
Data Packets in/out: 21/0
##############
DSG configuration
##############
R6
__
interface multilink 69
ip pim sparse mode
R9
__
ip multicast-routing
inter lo 0
ip pim sparse-mode
inter fas 0/1.789
ip pim sparse-mode
inter muli 69
ip pim sparse-mode
ip pim rp-address 166.9.9.9 override
ip msdp peer 166.14.14.14 connect-source Loopback0 remote-as 456
ip msdp peer 166.4.4.4 connect-source Loopback0 remote-as 78
ip msdp originator-id Loopback0
I am able to ping all multicast addresses with "my configuration" from AS456
and AS78
Thanks
Jason Maynard
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
