Just curious if anyone can shed some light.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jason Maynard Sent: January-15-11 12:20 PM To: [email protected] Subject: [OSL | CCIE_RS] VOL2 - LAB2 -TASK4.3 Hey All, I have configured this a little different and I am wondering if I would have scored the points or am I missing something The concern is R9 - I just used it to leverage MSDP and did not configure any interface with PIM nor did I configure it as a RP. ############# My configuration ############# R9 (This is all that I have configured on R9) __ ip multicast-routing ip msdp peer 166.14.14.14 connect-source Loopback0 ip msdp peer 166.4.4.4 connect-source Loopback0 ip msdp originator-id Loopback0 R9(config)#do sh ip msdp peer MSDP Peer 166.14.14.14 (?), AS 78 Connection status: State: Up, Resets: 0, Connection source: Loopback0 (166.9.9.9) Uptime(Downtime): 00:15:52, Messages sent/received: 38/19 Output messages discarded: 0 Connection and counters cleared 00:18:23 ago SA Filtering: Input (S,G) filter: none, route-map: none Input RP filter: none, route-map: none Output (S,G) filter: none, route-map: none Output RP filter: none, route-map: none SA-Requests: Input filter: none Peer ttl threshold: 0 SAs learned from this peer: 0 Input queue size: 0, Output queue size: 0 MD5 signature protection on MSDP TCP connection: not enabled Message counters: RPF Failure count: 0 SA Messages in/out: 5/5 SA Requests in: 0 SA Responses out: 0 Data Packets in/out: 2/0 MSDP Peer 166.4.4.4 (?), AS 456 Connection status: State: Up, Resets: 0, Connection source: Loopback0 (166.9.9.9) Uptime(Downtime): 00:17:33, Messages sent/received: 21/39 Output messages discarded: 0 Connection and counters cleared 00:18:10 ago SA Filtering: Input (S,G) filter: none, route-map: none Input RP filter: none, route-map: none Output (S,G) filter: none, route-map: none Output RP filter: none, route-map: none SA-Requests: Input filter: none Peer ttl threshold: 0 SAs learned from this peer: 0 Input queue size: 0, Output queue size: 0 MD5 signature protection on MSDP TCP connection: not enabled Message counters: RPF Failure count: 0 SA Messages in/out: 25/4 SA Requests in: 0 SA Responses out: 0 Data Packets in/out: 21/0 ############## DSG configuration ############## R6 __ interface multilink 69 ip pim sparse mode R9 __ ip multicast-routing inter lo 0 ip pim sparse-mode inter fas 0/1.789 ip pim sparse-mode inter muli 69 ip pim sparse-mode ip pim rp-address 166.9.9.9 override ip msdp peer 166.14.14.14 connect-source Loopback0 remote-as 456 ip msdp peer 166.4.4.4 connect-source Loopback0 remote-as 78 ip msdp originator-id Loopback0 I am able to ping all multicast addresses with "my configuration" from AS456 and AS78 Thanks Jason Maynard _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
