ok i m waiting for your reply Mark
Regards Narendra On Mon, Mar 7, 2011 at 9:17 AM, Marko Milivojevic <[email protected]>wrote: > > They *should*, but *do* they? ;-) Lab it up and let me know :-) > > -- > Marko Milivojevic - CCIE #18427 > Senior Technical Instructor - IPexpert > > FREE CCIE training: http://bit.ly/vLecture > > Mailto: [email protected] > Telephone: +1.810.326.1444 > Web: http://www.ipexpert.com/ > > On Sun, Mar 6, 2011 at 19:45, Narendra <[email protected]> wrote: > >> *Dear Marko Milivojevic* >> if all the switches are in same vtp domain then will they not share every >> thing related to vtp envoirnment. >> vtp has been updated in server then it should have updated in client too >> automatically. >> >> Regard >> Narendra Prasad >> ** >> *Marko Milivojevic* >> *Sun Mar 6 21:50:16 EST 2011* >> >> This is not a bug - it's an expected behavior. Clients cannot change >> operating parameters in the VTP domain, only servers can. If you wish o >> change operating version in the domain, you should do it from the server, >> or >> on the client before changing it to client mode. >> >> -- >> Marko Milivojevic - CCIE #18427 >> Senior Technical Instructor - IPexpert >> >> FREE CCIE training: http://bit.ly/vLecture >> >> Mailto: markom at >> ipexpert.com<http://onlinestudylist.com/mailman/listinfo/ccie_rs> >> >> Telephone: +1.810.326.1444 >> Web: http://www.ipexpert.com/ >> >> On Sun, Mar 6, 2011 at 18:22, <sfigueroa at >> mnet.com.mx<http://onlinestudylist.com/mailman/listinfo/ccie_rs>> >> wrote: >> >> >* Hello I found at some time that this was a BUG, then I do upgraded >> IOS. >> *>* >> *>* Best Regards. >> *>* >> *>* >> *>* >> *>* -----Mensaje original----- >> * >> >* De: ccie_rs-bounces at >> >onlinestudylist.com<http://onlinestudylist.com/mailman/listinfo/ccie_rs> >> *>* [mailto:ccie_rs-bounces at >> onlinestudylist.com<http://onlinestudylist.com/mailman/listinfo/ccie_rs>] >> En nombre de Trony Tigno >> * >> >* Enviado el: Domingo, 06 de Marzo de 2011 06:19 p.m. >> * >> >* Para: lukasz at >> >forward.pl<http://onlinestudylist.com/mailman/listinfo/ccie_rs> >> *>* CC: ccie_rs at >> onlinestudylist.com<http://onlinestudylist.com/mailman/listinfo/ccie_rs> >> * >> >* Asunto: Re: [OSL | CCIE_RS] VTP version >> *>* >> *>* Change the VTP operating mode from client to transparent or server. >> In >> *>* client mode, you are kind of limited on what you can do. >> *>* >> *>* Hopefully that works. >> *>* >> * >> >* On Sun, Mar 6, 2011 at 2:51 PM, <lukasz at >> forward.pl<http://onlinestudylist.com/mailman/listinfo/ccie_rs>> >> wrote: >> *>* >> *>* > Hi All, >> *>* > >> *>* > I've configured 2 switches to be in the same VTP domain. I set up >> one of >> *>* > them as VTP server and the other one as VTP client. I managed >> *>* > to change the server switch VTP version to be 2 but whenever I type >> *>* version >> *>* > 2 command on the client I received. >> *>* > >> *>* > Cat3(config)#vtp version 2 >> *>* > Cannot modify version in VTP client mode >> *>* > >> *>* > VTP Version : running VTP1 (VTP2 capable) >> *>* > Configuration Revision : 0 >> *>* > Maximum VLANs supported locally : 1005 >> *>* > Number of existing VLANs : 5 >> *>* > VTP Operating Mode : Client >> *>* > VTP Domain Name : >> *>* > VTP Pruning Mode : Disabled >> *>* > VTP V2 Mode : Disabled >> *>* > VTP Traps Generation : Disabled >> *>* > MD5 digest : 0x57 0xCD 0x40 0x65 0x63 0x59 >> 0x47 0xBD >> *>* > Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00 >> *>* > >> *>* > I checked cisco online documentation and it states that if you >> change the >> *>* > version on one of the switches to be version 2 the other capable >> version >> *>* 2 >> *>* > switches will use version 2 as well. Is that true? Can you explain >> why I >> *>* > cannot change the version number on the client switch? >> *>* > >> *>* > >> *>* > >> *>* > Thanks, >> *>* > Regards, >> *>* > Lukasz >> * >> >> -- >> Best Regards, >> >> Narendra Prasad >> >> > -- Best Regards, Narendra Prasad _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
