If IP phone and a pc are the devices , the mini-trunk or auxiliary port is the
solution.
If other type of device with more than one non-voice vlan needed, we can think
of trunk with vlan filtering ,like pruning or allowed list.
Regards
khaled
> From: [email protected]
> To: [email protected]; [email protected]
> Date: Mon, 7 Mar 2011 20:23:03 +0300
> CC: [email protected]; [email protected]
> Subject: Re: [OSL | CCIE_RS] Multiple Vlan configure on a port........
>
>
>
> What will be the connected device at the end ?
>
> Khaled
>
>
> > Date: Mon, 7 Mar 2011 10:03:46 -0500
> > From: [email protected]
> > To: [email protected]
> > CC: [email protected]; [email protected]
> > Subject: Re: [OSL | CCIE_RS] Multiple Vlan configure on a port........
> >
> > As every one has mentioned "Trunk" the only other thing I can think that you
> > may be trying to get out of us is voice vlan (This is essentially a trunk
> > port but I believe Cisco calls is an auxiliary port and suggest that it is
> > more secure than a full out trunk port)
> >
> > switchport access vlan 20
> > switchport voice vlan 30
> >
> >
> > On Mon, Mar 7, 2011 at 8:59 AM, Thomas Raabo - Zitcom A/S
> > <[email protected]>wrote:
> >
> > > Trunking...dot1q
> > >
> > >
> > > Med venlig hilsen | Best regards
> > > Thomas Raabo
> > > Netværks ansvarlig
> > >
> > >
> > >
> > > _____________________________________________
> > > [email protected] | Direkte: +45 69 10 60 18 | Tlf.: +45 70 23 55 66
> > >
> > >
> > > -----Original Message-----
> > > From: [email protected] [mailto:
> > > [email protected]] On Behalf Of Vinod singh Bisht
> > > Sent: 7. marts 2011 13:09
> > > To: venkat
> > > Cc: [email protected]
> > > Subject: Re: [OSL | CCIE_RS] Multiple Vlan configure on a port........
> > >
> > > dear venkat
> > >
> > > is it possible to have one switchport in multiple vlans.
> > >
> > > if it is, then please give the way by which i can do this.
> > >
> > >
> > >
> > > Regards
> > > Vinod Singh Bist
> > >
> > > On Mon, Mar 7, 2011 at 5:24 PM, venkat <[email protected]> wrote:
> > >
> > > > The last command over writes.. so if you do "show int fa0/24", you
> > > > will see only vlan 153.
> > > >
> > > > -Venkat
> > > >
> > > > On Mon, Mar 7, 2011 at 3:43 PM, Vinod singh Bisht <[email protected]
> > > >wrote:
> > > >
> > > >> Hi Guys,
> > > >>
> > > >> Can I configure multiple VLan on a switch port ?
> > > >>
> > > >> Ex:
> > > >>
> > > >> Sw1# config t
> > > >> Sw1(config )# int f0/24
> > > >> Sw1(config-if )#switchport access vlan 150 Sw1(config-if
> > > >> )#switchport access vlan 151 Sw1(config-if )#switchport access vlan
> > > >> 152 Sw1(config-if )#switchport access vlan 153 Sw1(config-if )#do
> > > >> wr...
> > > >>
> > > >> is it possible or it will work or not . I have try it on switch 2950
> > > >> cisco switch but I have configured only a vlan on a switch port f0/24.
> > > >>
> > > >> If you have solution then plz suggest me how is it possible with
> > > example?
> > > >>
> > > >>
> > > >>
> > > >>
> > > >> --
> > > >> VINOD SINGH BIST
> > > >>
> > > >> _______________________________________________
> > > >> For more information regarding industry leading CCIE Lab training,
> > > >> please visit www.ipexpert.com
> > > >>
> > > >
> > > >
> > >
> > >
> > > --
> > > VINOD SINGH BIST
> > > _______________________________________________
> > > For more information regarding industry leading CCIE Lab training, please
> > > visit www.ipexpert.com
> > > _______________________________________________
> > > For more information regarding industry leading CCIE Lab training, please
> > > visit www.ipexpert.com
> > >
> > _______________________________________________
> > For more information regarding industry leading CCIE Lab training, please
> > visit www.ipexpert.com
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
