.bin extension doesn't mean they are uncompressed. Please follow this link for more information : http://www.gns3.net/hardware-emulated and read the FAQ section. I had the same problem and I followed what they are suggesting to fix it.
Regards, Patrice Ngassam CEO NEN NET Inc. > Date: Fri, 27 May 2011 09:19:12 +0100 > From: [email protected] > To: [email protected] > Subject: RE: [OSL | CCIE_RS] gns3 IOS for 2600 > > Yes, > > All IOS versions has .bin extension in my IOS folder. Interesting thing > is I got that working when I put 1710 platform for BBx routers not 2600 > routers. > > > Thanks, > Regards, > Lukasz > > > > On Fri, 27 May 2011 03:50:38 +0200, Patrice Ngassam wrote: > > Do you use an uncompressed image? > > > > Regards, > > > > Patrice Ngassam > > > > _CEO NEN NET Inc._ > > > >> Date: Thu, 26 May 2011 20:36:38 +0100 > >> From: [email protected] > >> To: [email protected] > >> Subject: Re: [OSL | CCIE_RS] gns3 IOS for 2600 > >> > >> Hi matt, > >> > >> > >> I've tried that as well. I changed on the topology the path used by > > the > >> image and the topology loads correctly. > >> I am able to run Catx, Rx units but when I start BBx unit (LED is > >> green) and I try to console into it I only receive message > >> "Connected to Dynamips VM "BB3" (ID 8, type c2600) - Console port" I > > > >> cannot see if image loads correctly or not. > >> > >> When I start new topology with c2610 the image loads correctly and > >> everything works fine. > >> > >> > >> As I don't want to create the topology from the scratch It would be > >> nice to understand where the problem lies. > >> > >> > >> > >> Thanks, > >> Regards, > >> Lukasz > >> > >> On Thu, 26 May 2011 22:11:08 +1000, Matt Hill wrote: > >> > Change the router in GNS3 for one you have the IOS licence for. > >> > > >> > Cheers, > >> > Matt > >> > > >> > CCIE #22386 > >> > CCSI #31207 > >> > > >> > On 26 May 2011 20:44, Lukasz Szalacha wrote: > >> >> Hi All, > >> >> > >> >> > >> >> I've downloaded the topology and configs from ipexpert site so > > that > >> >> I can > >> >> use them on GNS3. As I don't have active support with cisco I am > > not > >> >> able to > >> >> download the C2600-j1s3-123-17a.bin image. Is there other image > > for > >> >> 2600 > >> >> that I can use that will include required features for CCIE > >> >> studying? > >> >> > >> >> > >> >> > >> >> Thanks, > >> >> Regards, > >> >> Lukasz > >> >> _______________________________________________ > >> >> For more information regarding industry leading CCIE Lab > > training, > >> >> please > >> >> visit www.ipexpert.com > >> >> > >> >> Are you a CCNP or CCIE and looking for a job? Check out > >> >> www.PlatinumPlacement.com > >> >> > >> > >> _______________________________________________ > >> For more information regarding industry leading CCIE Lab training, > > please visit www.ipexpert.com > >> > >> Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
