Hi! I think this might be related to feasibility condition not being met. So do you see it when you type "show ip eigrp topology all-links" ? I will suggest change the delay on int s0/2 by giving "delay 1" command.
Kind Regards, Nandan On Mon, Jan 16, 2012 at 2:44 PM, Marcin Krupinski <[email protected] > wrote: > hey, > > show me > > #show cdp nei > #show ip eigrp interfaces > #show run int s0/2 > > regards, > Marcin > > 2012/1/16 khaled al-ajeman <[email protected]> > > > Hi Guys, > > > > can anyone of you explain to me please why I could not see the both > serial > > interfaces of R5, even thought I have connected the both interfaces in > the > > topology diagram ? > > However, there are only one serial interface is available to me to see as > > follows: > > > > R5(config-if)#do sh ip ei top 100.100.100.0/24 > > IP-EIGRP (AS 1001): Topology entry for 100.100.100.0/24 > > State is Passive, Query origin flag is 1, 1 Successor(s), FD is 819200 > > Routing Descriptor Blocks: > > 150.100.100.2 (Serial0/0.56), from 150.100.100.2, Send flag is 0x0 > > Composite metric is (819200/307200), Route is Internal > > Vector metric: > > Minimum bandwidth is 10000 Kbit > > Total delay is 22000 microseconds > > Reliability is 255/255 > > Load is 1/255 > > Minimum MTU is 1500 > > Hop count is 2 > > As a matter of fact all my serial interface are up and running fine. > > > > my configurations are: > > router eigrp 1001 > > variance 2 > > redistribute connected metric 1 1 1 1 1 route-map eigrp-connected > > passive-interface default > > no passive-interface FastEthernet0/0 > > no passive-interface Serial0/0.56 --------- only this interface is > > available to see when I typed #sh ip ei top 100.100.100.0/24 > > no passive-interface FastEthernet0/1 > > no passive-interface Serial0/2 --------- This interface is not > > available to see when I typed #sh ip ei top 100.100.100.0/24 ----- can > > anyone explain to me why this interface is no showing? > > network 150.100.25.0 0.0.0.255 > > network 150.100.100.0 0.0.0.255 > > network 150.100.220.0 0.0.0.255 > > network 150.100.221.0 0.0.0.255 > > no auto-summary > > thanks, > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com > > > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
