Guys,
While making the setup, i noticed the routing loop, may i know the reason
why ? please help
Rack1R5#trace 150.1.6.6
Type escape sequence to abort.
Tracing the route to 150.1.6.6
1 155.1.0.3 16 msec 20 msec 20 msec
2 155.1.37.7 20 msec 20 msec 20 msec
3 155.1.37.3 20 msec 20 msec 20 msec
4 155.1.37.7 20 msec 24 msec 20 msec
5 155.1.37.3 20 msec 20 msec 16 msec
6 155.1.37.7 20 msec 20 msec 20 msec
7 155.1.37.3 20 msec 20 msec 20 msec
8 155.1.37.7 20 msec 20 msec 20 msec
9 155.1.37.3 20 msec 20 msec 20 msec
10 155.1.37.7 20 msec 20 msec 20 msec
11 155.1.37.3 16 msec 20 msec 16 msec
12 155.1.37.7 20 msec 20 msec 20 msec
13 155.1.37.3 20 msec 20 msec 20 msec
14 155.1.37.7 20 msec 24 msec 20 msec
15 155.1.37.3 16 msec 20 msec 20 msec
16 155.1.37.7 20 msec 20 msec 20 msec
17 155.1.37.3 20 msec 20 msec 20 msec
18 155.1.37.7 20 msec 20 msec 20 msec
19 155.1.37.3 20 msec 16 msec 20 msec
20 155.1.37.7 20 msec 20 msec 20 msec
Rack1R3(config-router)#do sh ip route 150.1.6.6
Routing entry for 150.1.6.0/24
Known via "bgp 100", distance 200, metric 0, type internal
Redistributing via eigrp 100
Advertised by eigrp 100 metric 1500 1 255 1 1500
Last update from 155.1.146.6 00:18:27 ago
Routing Descriptor Blocks:
* 155.1.146.6, from 155.1.13.1, 00:18:27 ago
Route metric is 0, traffic share count is 1
AS Hops 0
MPLS label: none
Rack1R3(config-router)#
Rack1R3(config-router)#do sh ip cef
Prefix Next Hop Interface
0.0.0.0/0 no route
0.0.0.0/8 drop
0.0.0.0/32 receive
127.0.0.0/8 drop
150.1.0.0/16 155.1.37.7 Ethernet0/0
150.1.3.0/24 attached Loopback0
150.1.3.0/32 receive Loopback0
150.1.3.3/32 receive Loopback0
150.1.3.255/32 receive Loopback0
150.1.6.0/24 155.1.37.7 Ethernet0/0
155.1.0.0/16 155.1.37.7 Ethernet0/0
155.1.0.0/24 attached Serial1/0.1
155.1.0.0/32 receive Serial1/0.1
155.1.0.3/32 receive Serial1/0.1
155.1.0.255/32 receive Serial1/0.1
155.1.5.0/24 155.1.0.5 Serial1/0.1
155.1.7.0/24 155.1.37.7 Ethernet0/0
155.1.8.0/24 155.1.0.5 Serial1/0.1
155.1.9.0/24 155.1.37.7 Ethernet0/0
155.1.10.0/24 155.1.0.5 Serial1/0.1
155.1.13.0/24 attached Serial1/2
155.1.13.0/32 receive Serial1/2
Rack1R3(config-router)#do sh ip cef 150.1.6.0
150.1.6.0/24
nexthop 155.1.37.7 Ethernet0/0
do i need to clear the fib for making successful communication ?
Regards,
Venkee
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
