You need to look at the route on the router 155.1.37.7. It is pointing back to R3 for some reason.
On Thu, Feb 2, 2012 at 12:54 AM, Venkee <[email protected]> wrote: > Guys, > > While making the setup, i noticed the routing loop, may i know the reason > why ? please help > > Rack1R5#trace 150.1.6.6 > > Type escape sequence to abort. > Tracing the route to 150.1.6.6 > > 1 155.1.0.3 16 msec 20 msec 20 msec > 2 155.1.37.7 20 msec 20 msec 20 msec > 3 155.1.37.3 20 msec 20 msec 20 msec > 4 155.1.37.7 20 msec 24 msec 20 msec > 5 155.1.37.3 20 msec 20 msec 16 msec > 6 155.1.37.7 20 msec 20 msec 20 msec > 7 155.1.37.3 20 msec 20 msec 20 msec > 8 155.1.37.7 20 msec 20 msec 20 msec > 9 155.1.37.3 20 msec 20 msec 20 msec > 10 155.1.37.7 20 msec 20 msec 20 msec > 11 155.1.37.3 16 msec 20 msec 16 msec > 12 155.1.37.7 20 msec 20 msec 20 msec > 13 155.1.37.3 20 msec 20 msec 20 msec > 14 155.1.37.7 20 msec 24 msec 20 msec > 15 155.1.37.3 16 msec 20 msec 20 msec > 16 155.1.37.7 20 msec 20 msec 20 msec > 17 155.1.37.3 20 msec 20 msec 20 msec > 18 155.1.37.7 20 msec 20 msec 20 msec > 19 155.1.37.3 20 msec 16 msec 20 msec > 20 155.1.37.7 20 msec 20 msec 20 msec > > Rack1R3(config-router)#do sh ip route 150.1.6.6 > Routing entry for 150.1.6.0/24 > Known via "bgp 100", distance 200, metric 0, type internal > Redistributing via eigrp 100 > Advertised by eigrp 100 metric 1500 1 255 1 1500 > Last update from 155.1.146.6 00:18:27 ago > Routing Descriptor Blocks: > * 155.1.146.6, from 155.1.13.1, 00:18:27 ago > Route metric is 0, traffic share count is 1 > AS Hops 0 > MPLS label: none > Rack1R3(config-router)# > Rack1R3(config-router)#do sh ip cef > Prefix Next Hop Interface > 0.0.0.0/0 no route > 0.0.0.0/8 drop > 0.0.0.0/32 receive > 127.0.0.0/8 drop > 150.1.0.0/16 155.1.37.7 Ethernet0/0 > 150.1.3.0/24 attached Loopback0 > 150.1.3.0/32 receive Loopback0 > 150.1.3.3/32 receive Loopback0 > 150.1.3.255/32 receive Loopback0 > 150.1.6.0/24 155.1.37.7 Ethernet0/0 > 155.1.0.0/16 155.1.37.7 Ethernet0/0 > 155.1.0.0/24 attached Serial1/0.1 > 155.1.0.0/32 receive Serial1/0.1 > 155.1.0.3/32 receive Serial1/0.1 > 155.1.0.255/32 receive Serial1/0.1 > 155.1.5.0/24 155.1.0.5 Serial1/0.1 > 155.1.7.0/24 155.1.37.7 Ethernet0/0 > 155.1.8.0/24 155.1.0.5 Serial1/0.1 > 155.1.9.0/24 155.1.37.7 Ethernet0/0 > 155.1.10.0/24 155.1.0.5 Serial1/0.1 > 155.1.13.0/24 attached Serial1/2 > 155.1.13.0/32 receive Serial1/2 > > Rack1R3(config-router)#do sh ip cef 150.1.6.0 > 150.1.6.0/24 > nexthop 155.1.37.7 Ethernet0/0 > > do i need to clear the > > Regards, > Venkee > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
