Hi
I'm setting up the Remote VPN on the ASA server which is configured in failover mode. When I try and connect via the VPN client I am unable to so and get the following debug message: [IKEv1]: IKE receiver: Local unit is failover enabled but is not currently active. This unit is configured as the primary and is active. Once I disable the failover pair the remote VPN connects and works as expected. As a test I have also re-pointed the VPN client at the address of the standby ASA to see if that works, but the standby ASA then responds with the same debug message as above and I'm still unable to connect. Any advice Kind Regards David ********************************************************************** DISCLAIMER: This correspondence may contain information which is confidential or proprietary or both. Any dissemination, distribution, copying or use of this communication without prior permission of the addressee is strictly prohibited. If you are not the intended recipient you may not disclose, copy or use this information. If you have received this message in error, please contact the sender to discuss its return or destruction. The contents, comments and views contained or expressed within this correspondence do not necessarily reflect those of Redstone, its subsidiaries, affiliates, associates or sister companies and are not intended to create legal relations with the recipient. Redstone may monitor email traffic data and also the content of email for the purposes of security and staff training. If you would like to know more about Redstone, visit us on the web at www.redstone.co.uk or contact our Head Office on 0845-200-2200. Redstone Converged Solutions Limited Registered in England & Wales with Company Number: 3476733 Registered Office: 80 Great Eastern Street, London EC2A 3RS **********************************************************************
