hi ,
It is done so that we can go ahead and access the ASA through the ASDM,
if you have a look at the startup guide it has instructions on how you can
you can do the initial setup on the ASA without a console cable,
the ASA has an inside IP address, and the inside interface would work
as a dhcp server that would assign an IP address to any computer that
connects to it..
once you access the asdm you can go ahead and use the wizard for vpn and
other configurations.
this ways you dont need a console to connect to the firewall and use
command line at all...
...
On Thu, Oct 15, 2009 at 1:54 PM, Anantha Subramanian Natarajan <
[email protected]> wrote:
> Hi All,
>
> I was going through the ASA config guide and understood that when the ASA
> is in factory default configuration,the inside interface or the management
> ip address would be 192.168.1.1/24 depending on the platform.Is there any
> specific significance of that particular ip address is been used for that.
>
> Thanks for the help
>
> Regards
> Anantha Subramanian Natarajan
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
--
Regards
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
