The correct answer is: If you try to upgrade a FWSM in a 6500-chassi and the upgrade fails so you cannot access it you are toast because there is no console port on the panel. However, if you open a Prio 1 TAC-case (which I did), a friendly tac-engineer can tell you to connect to the on-motherboard-mounted console-port and then reinsert the FWSM into the chassi. There is about 3mm of space between the slots, which is enough to have the console cable connected while powering up FWSM. ;)
Now I know, but I wasnt home until 3am. ;) /J 2010/4/13 Jimmy Larsson <[email protected]> > The other night I found out a reason for the standard light-blue > console-cable to be flat. I solved a problem which hadnt been possible if > the cable was thicker. > > Anyone take a guess? > > -- > ------- > Jimmy Larsson > Ryavagen 173 > s-26030 Vallakra > Sweden > http://blogg.kvistofta.nu > ------- > -- ------- Jimmy Larsson Ryavagen 173 s-26030 Vallakra Sweden http://blogg.kvistofta.nu -------
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
