My idea of the lab is as following: QEQ - 30 mins Lab - 8 hours
When can we take the break and how many breaks can we take. Is the break accounted in the 8 hours? Will we given separate time for reading the questions? With regards Kings On Thu, Apr 22, 2010 at 9:40 PM, Willians Barboza < [email protected]> wrote: > Just remember that unused time on OEQ can be used in the other part of > the lab... So, if you are sure of your questions, dont need to spend > the whole 30 minutes on it... > > 2010/4/22 Jimmy Larsson <[email protected]>: > > am thinking of time management. If I reserve the first 30 min for OEQ, > > another 30 min for me to read thru the entire lab and making > notes/diagrams > > while reading, and reserve the last hour for verification there are 6 > hours > > left for doing configuration. > > That means roughly 15 min per 4 points. (question: in ipexpert WB1/2, > most > > tasks are 4 points. Is it the same in the real lab)? > > Is this a realistic plan? I guess my goal then is to make all WB2 4 > points > > tasks under 15 minutes (yeah right, good luck to me!) ;) and also that I > > will drop a task unfinished if not done after lets say 20 minutes. > > Does this make sense? > > /J > > -- > > ------- > > Jimmy Larsson > > Ryavagen 173 > > s-26030 Vallakra > > Sweden > > http://blogg.kvistofta.nu > > ------- > > > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > > > > > > -- > Willians Barboza > CCIE Security # 25629 > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
