Hi all
I am using the following image:
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version
12.4(15)T13
All RMON interface commands are not present in the router.
*rmon *{*native *|* promiscuous*} *
rmon collection **
rmon collection history controlEntry* *integer* [*owner* *ownername*] [*
buckets* *bucket-number*] [*interval* *seconds*]*
rmon collection host controlEntry* *integer* [*owner* *ownername*]*
rmon collection matrix* *controlEntry* *integer* [*owner* *ownername*]
*rmon collection rmon1* *controlEntry* *integer* [*owner* *ownername*]
router(config-if)#rm?
% Unrecognized command
The global commands are not present:
*rmon hc-alarms
**rmon queuesize
router2(config)#rmon ?
alarm Configure an RMON alarm
capture-userdata Set the rmon packet zeroing function
event Configure an RMON event
** *
router(config)#rmon ?
alarm Configure an RMON alarm
capture-userdata Set the rmon packet zeroing function
event Configure an RMON event
Any thoughts?
With regards
Kings
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
